Everbuild Mammoth Packaging Tape - 48mm x 50m 
Code 8 Cast Lead - 1200mm x 3m 
ALM Code 6 Milled Lead Flashing - 450mm x 6m 
ALM Code 8 Milled Lead - 800mm x 3m 
Everbuild 506 Universal Contractors PVA - 5Kg White 
Everbuild External Frame Sealant - Grey 290ml (Box of 12) 
Timloc Double Pantile Tile Vent Red (Box of 6) 
Code 5 Cast Lead - 240mm x 3m 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Black - 300ml (Box of 12) 
Timco Classic Pozi Multi-Purpose Screws - Mixed Tray 
Everbuild Stixall Extreme Power – White 290ml 
Spax Phillips Ph3 Drill Bits - 25mm (Pack of 5) 
Samac Aluminium Clout Nails - 55mm x 3.35mm (1kg) 
OX Tools Pro Plasterers' Hawk - 330mm x 330mm 
Everbuild Forever White Silicone Sealant – 295ml 
OX Tools Drywall Rasp 250mm 
Everbuild Everflex Heat Mate Sealant - Red 295ml 
ALM Code 4 Milled Lead - 1000mm x 3m 
Right Hand Klober Contract Dry Verge Unit Grey 
ALM Code 7 Milled Lead - 360mm x 6m 
Cromar All Weather Roof Coat - Black 5 Litre 
Everbuild Black Jack 906 Bitumen Roofing Emulsion – 5 Litre 
Everbuild Forever White Powder Wall Tile Grout – 1.2kg 
Timco Firmahold Hammer Tacker 
Ronseal Stays White One Coat Non-Drip Paint - Matt 2.5L Roof Felt Adhesives
Best Sellers
-
Soudal All In One Genius Spray – 300ml
£7.24 Incl VAT £6.03 Excl VAT Read more -
Sika SikaFlex 221 Adhesive & Sealant – 300ml
From: £15.95 Incl VAT £13.29 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Soudal Trade Sanitary Silicone – Clear 290ml
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Soudal Decorators Caulk – White 290ml (Box of 24)
£43.92 Incl VAT £36.60 Excl VAT Add to basket -
Timco Twin-Threaded Woodscrew Mixed Tray
£18.99 Incl VAT £15.83 Excl VAT Add to basket -
Samac Aluminum Slate Straps (Tingles) – 150mm
From: £7.49 Incl VAT £6.24 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
