Thompson's Emergency Roof Seal - Black 2.5L 
FloPlast Square Line Offset Bend 112.5° Black – 65mm 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 400) 
ALM Code 8 Milled Lead - 800mm x 3m 
Ronseal 6 Year Anti Mould Paint - White Silk 2.5L 
Everbuild Clear Fix – 290ml (Box of 12) 
Soudal Repair Express Cement – Grey 290ml (Box of 12) 
ALM Code 3 Milled Lead - 390mm x 3m 
Code 8 Cast Lead - 300mm x 6m 
Code 4 Cast Lead - 390mm x 3m 
Ronseal Exterior Yacht Varnish - Satin 500ml 
Timco 8 Spanner Set 
Freeflow 112mm Round Gutter System Stopend Outlet - White 
Bond It B1 Fire Resistant PU Gun Grade Expanding Foam - Pink 750ml 
Everbuild Black Jack 908 DPM – 25 Litre 
Ronseal One Coat Water-Based Tile Paint - Ivory Satin 750ml 
FloPlast Square Line Shoe White – 65mm 
OX Tools Pro Carpenters Square & Angle Finder 300mm / 12in 
Samac Snowguard - 225mm x 2m 
Klober Profile-Line Flat Tile Vent - Brown KG9856-3-0247 (Box of 10) 
Timloc InvisiWeep Extension Tube - 500mm Clear 
Everbuild Wet Rot Wood Hardener – 250ml 
Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
Klober Uni-Line Flexipipe Soil Pipe 100/100mm 4" - (KG979900) 
Soudal Genius Gun Plasterboard Adhesive - 750ml (Box of 12) 
Sika MultiSeal Self Adhesive Bituminous Sealing Tape - Grey (225mm x 10m) 
Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10) 
Klober Uni Angle Ridge End Cap, Black 
Soudal Fix ALL High Tack – White 290ml (Box of 12) 
Code 5 Cast Lead - 150mm x 6m 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Brown (Box of 5) 
Bond It Patination Oil 500ml 
Soudal Trade Gun and Foam Cleaner - 500ml 
Code 3 Cast Lead - 510mm x 3m 
Ronseal Stays White One Coat Non-Drip Paint - Satin 2.5L Roof Felt Adhesives
Best Sellers
-
Everbuild B1 Hand Held Expanding Fire Rated Foam – Pink 750 ml
£12.99 Incl VAT £10.83 Excl VAT Add to basket -
Easy-Trim Over Fascia Vent – 10mm x 1m
£2.50 Incl VAT £2.08 Excl VAT Add to basket -
Feb Brickclean – 5 Litre
£15.77 Incl VAT £13.14 Excl VAT Read more -
Hambleside Danelaw Double Pantile Vent TV15/2 – Brown (Box of 5)
£114.99 Incl VAT £95.83 Excl VAT Add to basket -
ALM Code 5 Milled Lead – 210mm x 6m
£90.62 Incl VAT £75.52 Excl VAT Add to basket -
Bond It High Gloss Block Sealer – Clear 5L
£59.99 Incl VAT £49.99 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
