Everflex Premium+ 450 Builders Silicone – Translucent 300ml (Box of 25) 
Timco Firmahold Hammer Tacker 
Bond It No Crack Caulk - White 310ml 
Freeflow 114mm Square Gutter Fascia Bracket - White 
Soudal Aquafix All Weather Sealant – Clear 300ml 
Permavent Easy Slate 600 - Pack of 20 
Ronseal Multi Purpose Filler Smooth Finish Powder - 2Kg 
ALM Code 7 Milled Lead - 914mm x 6m 
ALM Code 3 Milled Lead - 1200mm x 3m 
Everbuild Mammoth Clear Weatherproof Tape 
Code 5 Cast Lead - 210mm x 6m 
ALM Code 5 Milled Lead - 1600mm x 3m 
Thompson's Stain Block Damp Seal - White 750ml 
Bond It Contractors PVA - 1L White 
Ronseal 3 in 1 Basecoat - White 5L 
Sika Patio Seal – 5 Litre 
Ronseal Exterior Yacht Varnish - Gloss 250ml 
Ronseal Interior Varnish - Clear Satin 2.5L 
Everbuild Stick2 Superglue De-Bonder - 20ml 
OB41 Electrical Contact Cleaner - 400ml 
ALM Code 4 Milled Lead - 180mm x 6m 
Hambleside Danelaw (HD PCSPA) Tile Vent Adaptor and Flexi for TV10 Range 
Soudal Genius Gun Gap Filler Expanding Foam - 600ml 
Everbuild Pinkgrip Dryfix FR – 750ml (Box of 12) 
Ronseal Fence Life Brush - 4" Roof Felt Adhesives
Best Sellers
-
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent
From: £25.99 Incl VAT £21.66 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild STICK2® All-Purpose Contact Adhesive – 5 Litre
£44.99 Incl VAT £37.49 Excl VAT Add to basket -
Everbuild Safer Spirit – 750ml
£4.99 Incl VAT £4.16 Excl VAT Add to basket -
Samac Galvanised ELH Felt Nails – 40mm x 3.00mm
From: £6.70 Incl VAT £5.58 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Code 7 Cast Lead – 180mm x 6m
£111.38 Incl VAT £92.82 Excl VAT Add to basket -
Aluflow Downpipe Bracket – (RAL Colours)
£21.41 Incl VAT £17.84 Excl VAT Read more
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
