Ronseal uPVC Cleaner - 750ml 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Terracotta (Box of 5) 
Code 8 Cast Lead - 300mm x 6m 
Cromar Bitumen Primer – Black 5 Litre 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
Ronseal 3 in 1 Basecoat - White 5L 
Ronseal uPVC Paint - Black Satin 2.5L 
Cromar Black Bitumen Paint – 2.5 Litre 
Ronseal Stays White 2in1 Paint & Primer - Matt 2.5L 
Everbuild Black Jack 905 All Weather Roof Coating – 5 Litre 
ALM Code 6 Milled Lead Flashing - 760mm x 3m 
Everbuild Everflex Contract 700T LMN Silicone - Translucent (Box of 25) 
Easy-Trim Over Fascia Vent - 10mm x 500mm (Box of 60) 
Timloc Telescopic Underfloor Vent 5-7 Courses 
ALM Code 8 Milled Lead - 1200mm x 6m 
ALM Code 5 Milled Lead - 360mm x 6m 
Klober Profile-Line Adaptor & Flexipipe - KG979100 / KG979900 
Everbuild Griptite Construction Adhesive - 350ml 
Bond It Trowel Mastic - Black 5L 
Bond It Decking Cleaner - Clear 5L 
Code 7 Cast Lead - 510mm x 3m 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
Ronseal 5 Minute Multi-Purpose Smooth Finish Filler - 290ml 
20 x Cromar Vent 3 Classic Breathable Membrane - 1m x 50m 
Ronseal uPVC Paint - White Satin 2.5L 
Soudal Soudatherm Roof 250 - 800ml 
Siroflex Seal & Fix Hybrid Adhesive & Sealant - Black 290ml Roof Felt Adhesives
Best Sellers
-
Code 4 Cast Lead – 210mm x 3m
£37.13 Incl VAT £30.94 Excl VAT Add to basket -
Everbuild Fix & Fill Expanding Foam – 750ml (Box of 12)
£75.00 Incl VAT £62.50 Excl VAT Read more -
FloPlast Round 92½° Bend – White
£2.74 Incl VAT £2.28 Excl VAT Add to basket -
Everbuild External Frame Sealant – Brown 290ml (Box of 12)
£25.20 Incl VAT £21.00 Excl VAT Add to basket -
ALM Code 3 Milled Lead – 240mm x 3m
£31.15 Incl VAT £25.96 Excl VAT Add to basket -
Bostik Flexacryl Roof Repair Paint – 1kg
From: £19.99 Incl VAT £16.66 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
