Bond It Bitumen Primer - Black 2.5L 
ALM Code 3 Milled Lead - 1200mm x 6m 
Code 8 Cast Lead - 150mm x 3m 
Ronseal Diamond Hard Floor Varnish - Clear Matt 5L 
Soudal Repair Express Plaster - White 250ml 
ALM Code 7 Milled Lead - 210mm x 3m 
Bond It The Beast PU Adhesive - Brown 250ml 
Soudal Silicone Spray - 400ml (Box of 12) 
Ronseal Stays White One Coat Non-Drip Paint - Matt 750ml 
Everbuild PVC Hazard Tape - Black/Yellow (50mm x 33m) 
Klober Uni-Plain Roof Tile Vent Adaptor & Flexipipe - KG992800 
Everbuild Lumberjack 5 Minute PU Wood Adhesive Gel – 310ml 
Sika MultiSeal Self Adhesive Bituminous Sealing Tape - Grey (225mm x 10m) 
Youngman Double Section Roof Ladder 3.77m (57663600) 
Bond It One Hit Wonder Lightweight Filler - White 1L 
Siroflex Trade High Viscosity Superglue - 20g 
OX Pro Tuff Spirit Level - 1200mm 
Cromar Vent 3 Classic Breathable Membrane - 1m x 25m 
Timloc Telescopic Underfloor Vent 5-7 Courses 
ALM Code 8 Milled Lead - 150mm x 3m 
ALM Code 6 Milled Lead Flashing - 914mm x 3m Flashing Tape
Best Sellers
-
84 x Eridge Dry Fix Ridge System Black – 6M Kit
£2,478.00 Incl VAT £2,065.00 Excl VAT Add to basket -
Ulti-Mate 10K Slate Vent Adaptor
£9.99 Incl VAT £8.33 Excl VAT Add to basket -
SikaFlex 221 Adhesive & Sealant – White 300ml (Box of 12)
£119.00 Incl VAT £99.17 Excl VAT Read more -
Timloc Non-Profile Tile Vent Black (Box of 8)
£159.99 Incl VAT £133.33 Excl VAT Add to basket -
Timco Tape Measure
From: £7.99 Incl VAT £6.66 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Bostik Flashband Self Adhesive Flashing Tape – Grey 3.75m x 75mm
£8.99 Incl VAT £7.49 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
