ALM Code 7 Milled Lead - 1600mm x 3m 
Ronseal Stays White One Coat Non-Drip Paint - Matt 750ml 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
Everflex Contract 125 One Hour Caulk, White - 300ml (Box of 25) 
Hambleside Danelaw TV15/7 Tile Vent - Slate Grey (Box of 5) 
Ronseal Exterior Yacht Varnish - Satin 500ml 
ALM Code 3 Milled Lead - 600mm x 6m 
Chesterfelt Polyester Reinforced Shed Roofing Felt - Charcoal 10m x 1m 
Timloc Plain Tile Vent Red (Box of 14) 
Thompson's Stain Block Damp Seal - White 250ml 
Ronseal One Coat Stain Block - White 2.5L 
FloPlast Square Line Internal Stop End Black – 114mm 
FloPlast Round 92½° Bend - Black 
Soudal 5 Minute D4 Wood Adhesive Liquid – 750g 
Everbuild Black Jack 901 Black Bitumen Paint – 25 Litre 
Gorilla Wood Glue - Brown 1L 
Gorilla Glue - Dark Brown 60ml 
ALM Code 8 Milled Lead - 180mm x 6m 
FloPlast Square Line Downpipe Offset Bend 92.5° White – 65mm 
Everbuild Everflex 200 Contractors LMA Silicone - White 295ml 
Stanley Dynagrip Chisel Knife - 25mm 
FloPlast Round Line Downpipe Clip, Brown Flashing Tape
Best Sellers
-
Ronseal One Coat Stays White Radiator Paint – Gloss 750ml
£21.99 Incl VAT £18.33 Excl VAT Add to basket -
OX Speedskim Semi Flexible Plastering Rule
From: £40.49 Incl VAT £33.74 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Restec Flexitec 2020 Resin – 20kg (Dark Grey)
£185.99 Incl VAT £154.99 Excl VAT Read more -
ALM Code 5 Milled Lead – 1600mm x 3m
£345.50 Incl VAT £287.92 Excl VAT Add to basket -
Code 3 Cast Lead – 180mm x 6m
£45.70 Incl VAT £38.08 Excl VAT Add to basket -
Code 6 Cast Lead – 210mm x 3m
£54.26 Incl VAT £45.22 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
