Code 6 Cast Lead - 390mm x 3m 
Thompson's One Coat Patio & Block Paving Seal - 5L 
Easy-Trim Over Fascia Vent - 10mm x 1m 
Siroflex SX Contractors LMN Silicone OAK 300ml 
Ronseal 5 Minute Multi-Purpose Smooth Finish Filler - 600ml 
Klober 20K Slate Vent KG9795-0429 Slate Grey 
Bond It Lightweight Scrim Tape - 48mm x 90m White 
Permavent Eco Breather Membrane 1m x 50m 
Easy-Trim Universal Dry Verge System - Brown (Box of 50) 
Samac Snowguard - 150mm x 2m 
Ronseal uPVC Paint - Royal Blue Satin 750ml 
Ronseal One Coat All Surface Primer and Undercoat - White 2.5L 
Armatool Slate Rip, Forged Steel 
Code 7 Cast Lead - 1600mm x 3m 
Everbuild EuroScrim Plasterboard Tape – 100mm x 90m 
FloPlast Half Round Internal Stop End, Black – 112mm 
Everbuild Showerproof Bathroom Silicone – White 280ml 
ALM Code 7 Milled Lead - 850mm x 6m 
ALM Code 8 Milled Lead - 850mm x 3m 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
FloPlast Half Round Gutter 135° - Black 
Ronseal Diamond Hard Floor Varnish - Clear Matt 2.5L 
Hambleside Danelaw TV15/4 Tile Vent - Antique Red (Box of 5) 
Bond It B2 Expanding PU Gun Grade Foam - Beige 750ml Flashing Tape
Best Sellers
-
OX Pro Wide Head End Cutting Nippers – 200mm
£21.69 Incl VAT £18.08 Excl VAT Add to basket -
Over Fascia Vent, 25mm Single
£6.10 Incl VAT £5.08 Excl VAT Add to basket -
Ronseal Stays White Ultra Tough White Matt Paint – 2.5L
£26.18 Incl VAT £21.82 Excl VAT Add to basket -
Restec Flexitec 2020 Powder Hardener – 1kg
£43.99 Incl VAT £36.66 Excl VAT Read more -
Everbuild 209 Liquid Mortar Tone – Black 1 Litre
£8.95 Incl VAT £7.46 Excl VAT Add to basket -
Soudal Trade Multi-Purpose Silicone – 270ml
From: £3.99 Incl VAT £3.33 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
