OX Tools OXIT Sealant & Adhesive - White 290ml (Box of 12) 
Bond It Patio Blaster - Clear 2.5L 
Bulk Pallet 72 Packs- FirmaHold 2.8 x 63/3CFC Collated Clipped Head Nails & Fuel Cells - Ring Shank 
Everbuild Pinkgrip Dryfix FR – 750ml 
DeWalt FLEXTORQ Set PZ2 + Drive Guide in Small Bulk Storage Case 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 400ml 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
Code 4 Cast Lead - 1200mm x 3m 
Freeflow 65mm Square Down Pipe Connector - Black 
Hambleside Danelaw (HD PCSPA) Tile Vent Adaptor and Flexi for TV10 Range 
ALM Code 8 Milled Lead - 390mm x 3m 
OX Pro Mini Square Mouth Shovel 
Sika Patio Seal – 5 Litre 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Bond It Bitumen Primer - Black 5L 
FloPlast Black Half Round Adjustable Angle - 50° to 156° 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – White 300ml 
Hambleside Danelaw TV15/4 Tile Vent - Terracotta (Box of 5) 
Ronseal One Coat All Surface Primer and Undercoat - White 250ml 
Everbuild One Strike Filler - White 2.5L 
Hambleside Danelaw (HD DPCSPA) Tile Vent Adaptor and Flexi for TV10 Range 
Ronseal Crystal Clear Outdoor Varnish - Satin 250ml 
ALM Code 4 Milled Lead - 600mm x 6m 
Everbuild Salt-Away Salt Remover – 5 Litre 
Ronseal Ultimate Finish Interior Floor Pad Kit 
Bond It Drive Alive Tarmac Restorer - 4 Litres Flashing Tape
Best Sellers
-
Everbuild Tecnic Silicone 825 – Mid Grey 380ml (Box of 25)
£139.75 Incl VAT £116.46 Excl VAT Read more -
Sekosnap H Connector Fix Kit
From: £11.76 Incl VAT £9.80 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Code 8 Cast Lead – 180mm x 3m
£62.83 Incl VAT £52.36 Excl VAT Add to basket -
Soudal Mitre Bonding Kit Superglue Adhesive & Activator
£8.99 Incl VAT £7.49 Excl VAT Read more -
Soudal Repair Express Cement – Grey 290ml (Box of 12)
£34.92 Incl VAT £29.10 Excl VAT Read more -
Code 8 Cast Lead – 450mm x 3m
£154.22 Incl VAT £128.52 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
