Cromar Bitumen Primer – Black 1 Litre 
ALM Code 4 Milled Lead - 180mm x 6m 
Code 7 Cast Lead - 150mm x 3m 
OX Tools 12 inch / 300mm Trade Plastic Plasterers Mud Pan 
Everbuild Everflex Contract 700T LMN Silicone - Translucent (Box of 25) 
Code 5 Cast Lead - 210mm x 6m 
Everbuild Patio Wizard – 1 Litre 
Everbuild Anchorset Green 300 - Grey 300ml (Box of 12) 
Klober Adaptor For 20K Vents - KG979700 
Everbuild Exact Gap Foam - 750ml (Box of 12) 
FloPlast Half Round Downpipe Socket, Black 
Bond It Glass Cleaner - Clear 1L 
Code 4 Cast Lead - 390mm x 3m 
Freeflow 65mm Square Gutter Drain Pipe Shoe - Black 
OX Tools Plasterers Bucket, Blue – 25 Litre 
Timloc 3-in-1 Eaves Vent Pack - 6m 
Timloc Castellated Tile Vent Terracotta (Box of 8) 
Soudal Soudafoam Gap Filler Hand Held 750ml 
Timloc Interlocking Plain Tile Vent Brown (Box of 12) 
OX Tools OX Pro Aluminium Kevlar Chalk Line Reel and Refill 
Everbuild Seal Rite Strip / Smooth Out Twin Pack 
Timco Round Wire Nails, Pack of 40 
Everflex Galva Mate Duct Sealant - C3 
Spax Pozi Pz3 Drill Bits - 25mm (Pack of 5) 
ALM Code 8 Milled Lead - 150mm x 3m 
Ronseal Trade Polyurethane Satincoat Varnish - 2.5L 
Bostik Cementone PVA - 5 Litre 
Armatool Lead Dresser Set - 5 Piece Set 
Thompson's One Coat Damp Seal - White 250ml 
Code 3 Cast Lead - 150mm x 6m 
OX Spectrum Trade XL 3 Core & Accessories Set 
Ronseal Stays White 2in1 Paint & Primer - Satin 750ml 
Bond It SBR Admixture - White 2.5L 
Klober Profile-Line Limarech Tile Vent - Terracotta KG9859-3-0152 (Box of 10) 
ALM Code 7 Milled Lead - 914mm x 3m 
Hambleside Danelaw TV15/7 Tile Vent - Brown (Box of 5) 
Code 8 Cast Lead - 914mm x 6m 
Bond It Aluminium Solar Reflective Paint - Silver 2.5L 
FloPlast Square Gutter 90° Bend - White Flashing Tape
Best Sellers
-
Galvanised Shed Felt Nails 1kg – 25mm
£9.50 Incl VAT £7.92 Excl VAT Read more -
IKO Easymelt Bonding Bitumen Keg – 10kg
£24.99 Incl VAT £20.83 Excl VAT Add to basket -
Hedgehog Gutter Brush Leaf Guard Brown – 4m x 100mm
£14.75 Incl VAT £12.29 Excl VAT Add to basket -
Bond It Mirror Pro Adhesive – White EU3
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Bond It PVCu Solvent Fast Acting Cleaner – Clear 1L
£7.29 Incl VAT £6.08 Excl VAT Add to basket -
Ronseal Direct to Metal Paint – Satin 2.5L
From: £39.99 Incl VAT £33.33 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
