FrogTape® Delicate Surface Masking Tape - Yellow 24mm x 41.1m 
Timco Flat Wood Bit 1/4" Extension Rod - 150mm 
Code 3 Cast Lead - 150mm x 3m 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Black (Box of 5) 
Everbuild Caulk Once – White 295ml 
Soudal Bathroom & Kitchen Silicone - Clear 290ml (Box of 12) 
Right Hand Klober Contract Dry Verge Unit Brown 
Bond It Bitumen Paint - Black 25L 
Everbuild Anchorset Green 150 - Grey 150ml 
Soudal Handheld Gap Filler Expanding Foam - Champagne 750ml (Box of 12) 
Bond It Foil Safe Solvent Cleaner - Clear 1L 
Easy-Trim Universal Dry Verge System Black (Pallet of 800) 
Soudal Genius Gun Gap Filling Foam - 750ml 
Code 8 Cast Lead - 390mm x 3m 
ALM Code 6 Milled Lead Flashing - 1000mm x 3m 
Bond It Silicone Ultra Waterseal - Clear 5L 
Everbuild PVC Hazard Tape - Black/Yellow (50mm x 33m) 
ALM Code 4 Milled Lead - 1000mm x 6m 
Hambleside Danelaw Felt Lap Vent 
Everbuild Jumbo Mitre Fast Kit Superglue & Activator 
Gorilla Wood Glue - Brown 236ml 
Timco Carpenter’s Speed Auger & Flat Wood Bit Kit 
Cromar Bitumen Trowel Mastic - Black 5L Flashing Tape
Best Sellers
-
Climateq POP 135 Breather Membrane 1m x 50m
£43.99 Incl VAT £36.66 Excl VAT Read more -
Code 5 Cast Lead – 1600mm x 6m
£696.86 Incl VAT £580.72 Excl VAT Add to basket -
Code 6 Cast Lead – 390mm x 3m
£99.96 Incl VAT £83.30 Excl VAT Add to basket -
Code 7 Cast Lead – 450mm x 3m
£137.09 Incl VAT £114.24 Excl VAT Add to basket -
ALM Code 8 Milled Lead – 150mm x 6m
£101.95 Incl VAT £84.96 Excl VAT Add to basket -
Ronseal 10 Year Weatherproof Wood Paint (2 in 1 Formula) – Gloss 2.5L
From: £26.99 Incl VAT £22.49 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
