Ronseal Trade Polyurethane Satincoat Varnish - 2.5L 
ALM Code 4 Milled Lead - 1000mm x 3m 
Bond It Professional Foam Gun Applicator 1M 
ALM Code 3 Milled Lead - 150mm x 3m 
Timco Lifting Sling 2000kg / 2 Tonnes 
84 x Eridge Dry Fix Ridge System Black - 6M Kit 
Thompson's Water Seal - 1L 
Samac Copper Wire Coil 36m x 2mm 
Everbuild 102 Butyl Glazing Compound - Brown 2kg 
FloPlast Square Line Pipe Connector White 
Code 4 Cast Lead - 240mm x 3m 
ALM Code 6 Milled Lead Flashing - 600mm x 3m 
Soudal Soudabond 265 Classic Spray - 500ml 
Soudal Window & Door Expanding Foam - Genius Gun Max 600ml Champagne (Box of 12) 
OX Tools OXIT Sealant & Adhesive - Anthracite 290ml (Box of 12) 
Bond It Bitumen Paint - Black 25L 
Ronseal Exterior Yacht Varnish - Satin 250ml 
Code 5 Cast Lead - 1200mm x 6m 
Timloc Universal Roof Slate Vent + Adaptor kit 
Bond It Mould Stop - Clear 2.5L 
FloPlast Half Round Internal Stop End, Black – 112mm 
Klober Profile-Line Flat Tile Vent - Brown KG9856-3-0247 (Box of 10) 
Hedgehog Gutter Brush Leaf Guard White – 4m x 100mm 
Code 8 Cast Lead - 300mm x 3m 
OX Tools Pro Sharpdraw Snap Off Pencil Replacement Blades - Set of 3 
Ox Tools Spectrum Superior Diamond Blade 115/22.23mm 
Ronseal Quick Drying Radiator Spray Paint - White Satin 400ml 
Cromar Black Bitumen Paint – 2.5 Litre 
FloPlast Square Union Unit - Black 
Soudal Genius Gun Building Adhesive 750ml - Champagne 
Cromar Protect 1F Non-Breathable Roofing Felt – 1m x 15m 
Soudal Mitre Bonding Kit Superglue Adhesive & Activator - (Box of 24) 
Spax T-Star Plus Washer-Head Wirox Coated Screws - 6.0 x 200mm (Box of 16) 
OX Pro Top Steady Nail-On (Full Kit) Clamp Set 
Timloc Castellated Tile Vent Red (Box of 8) 
Permavent Dry+ Breather Membrane 1m x 50m 
Sika 1 Waterproofer – 5 Litre 
Bond It Mega Foam Gun/Aerosol PU Expanding Foam - Beige 500ml 
FloPlast Square to Round Downpipe Adaptor - Brown Flashing Tape
Best Sellers
-
ALUKAP-XR Ridge Radius End Cap, White or Brown
From: £103.32 Incl VAT £86.10 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
ALUKAP-SS Wall and Eaves Beam Post, White or Brown
From: £372.22 Incl VAT £310.18 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Ulti-Mate Wessex Tile Vent – (Brown, Grey)
From: £59.99 Incl VAT £49.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Hambleside Danelaw Double Plain Tile Vent, TV10/9 – Antique Red (Box of 5)
£114.99 Incl VAT £95.83 Excl VAT Add to basket -
Code 6 Cast Lead – 760mm x 6m
£391.27 Incl VAT £326.06 Excl VAT Add to basket -
ALM Code 5 Milled Lead – 1000mm x 6m
£430.46 Incl VAT £358.72 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
