Everbuild 402 Waterseal – 25 Litre 
Everbuild Multi-Stick Adhesive - White 350ml 
Samac Hall Hooks - (Bags of 10) 
Everbuild Forever Clear Silicone Sealant – 295ml 
Soudal Parquet & Timber Sealant - Dark Grey 290ml 
ALM Code 4 Milled Lead - 360mm x 3m 
Timco Lifting Sling 2000kg / 2 Tonnes 
Thompson's One Coat Concrete Seal - 5L 
Bond It Mirror Pro Adhesive - White EU3 
IKO 5U Eaves Protection Strips - 16m x 330mm 
Timloc Castellated Tile Vent Grey (Box of 8) 
Bond It Sealant Applicator Tool 
Ronseal Stays White Ultra Tough White Gloss Paint - 2.5L 
Ronseal Quick Drying Smooth Finish Filler - 600g 
Ronseal Stays White 2in1 Paint & Primer - Satin 2.5L 
Bond It Roof-Mate Roof & Gutter Sealant - Black EU3 
Everbuild PVCu Solvent Cleaner – 1 Litre (Box of 12) 
Cromar ProRidge Universal Ridge System 3m Kit 
FrogTape® Delicate Surface Masking Tape - Yellow 36mm x 41.1m 
Ronseal Super Flexible Smooth Finish Filler - 300ml 
Soudal Grip All Solvent-Based - 290ml 
Bond It Bitumen Paint - Black 5L 
Bond It FG8 Food Grade Silicone - White 310ml 
Freeflow 65mm Square Gutter Drain Pipe Shoe - Black 
Bond It Aluminium Foil Tape - 100mm x 45M (Box of 12) 
OX Pro Mini Square Mouth Shovel 
Soudal Soudafoam Window & Door Gun Grade – 750ml (Box of 12) 
Everbuild Industrial Superglue HV – Clear 20g 
ALM Code 8 Milled Lead - 850mm x 3m 
Everbuild Coving Adhesive & Joint Filler - White 290ml (Box of 12) 
Uses
The Rubber Bitumen Emulsion by Bond is excellent and highly effective at providing a damp-proof membrane in sandwich constructions and water protection for floors, walls, and other above-ground structures. It's formed into a bituminous waterproofing compound that can also act as a curing membrane when applied to green concrete. This product can also be an equally effective adhesive for wood blocks, wood mosaic panels, insulation boards, expanding polystyrene, and cork panels.
Preparation
Preparing the surface should be done in accordance with the British Standard 8102 Code of Practice—for the protection of buildings against water from the ground. Besides that, cleaning the surface and removing any contaminants that can hinder this product's adhesion, including dirt, dust, grease, oil, organic growth, etc., should be removed.
Application
- This product should be applied via brush.
- When applying it to damp-proof floors, apply two coats with the second brushed perpendicular to the first, then apply a 50mm sand/cement or concrete screed on top.
- For weatherproofing walls, it depends on how damp they are. If it's extremely damp, hack away to the brickwork and apply three coats of the emulsion to the interior and if you can, exterior as well.
- If they aren't as damp, but damp is present, remove any paint or wallpaper and lightly dampen the wall with water, then apply three coats over. Ensure when applying to internal walls, you allow a 300mm deep horizontal strip along the top of the wall to allow any moisture to escape via evaporation.
