ALM Code 6 Milled Lead Flashing - 390mm x 3m 
Code 3 Cast Lead - 300mm x 6m 
Code 4 Cast Lead - 300mm x 6m 
Code 6 Cast Lead - 150mm x 3m 
Ronseal Exterior All Surface Primer & Undercoat - White 750ml 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Black - 300ml (Box of 12) 
Everbuild Stick2 Spray Contact Adhesive – Beige 500ml 
Ronseal Wet Rot Wood Hardener - 750ml 
FloPlast Square Line Stop End Outlet Black – 114mm x 65mm 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 100mm 
Code 8 Cast Lead - 150mm x 6m 
Timco Mixed Carriage Bolts, Nuts and Washers Grab Pack 
Soudafoam Window & Door Hand Held - 750ml 
Bond It The Beast PU Adhesive - Brown 500ml 
ALM Code 5 Milled Lead - 210mm x 6m 
FloPlast Square Line Internal Stop End Black – 114mm 
Soudal Fix ALL High Tack Hybrid Sealant - Invisible 290ml 
Soudal B1 Fire & Acoustic Expanding Foam Genius - 600ml 
500 x Felt Support Trays 1.5m (Half Pallet) 
ALM Code 4 Milled Lead - 360mm x 3m 
Bostik Brushable Waterproofer - Black 5L 
Thompson's Stain Block Damp Seal - White 250ml 
Gorilla Super Glue Gel Twin Pack - Clear 3g 
Bond It Economy Sealant Gun - Blue 400ml (EU3 + EU4) 
Uses
This product has outstanding properties allowing it to be used on various surfaces in various environments. It is suitable for sealing around baths, showers, basins and other sanitary ware, and it can also seal worktops, laminates and aluminium gutter sealing. You can also use this product as an adhesive, and it's excellent for fixing PVCu Trims, cladding and panels together.
Preparation
Before you can begin the application, you must prepare the surfaces. You can achieve this by removing dust, loose flakes, old sealants, grease, oil and other contaminants that can hinder the adhesion. Once you have completed this, make sure you dry the surface, and then you can begin application.
If the application area has a large gap, use an expanding foam or joint backing rod to support the silicone bond. Otherwise, you'll use more silicone sealant than needed to fill the void.
Applications
- Unscrew the top of the cap.
- Cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled.
- Squeeze the tube, apply even pressure and begin the application.
- Smooth down the sealant within 15 minutes of application, and you can do this by using a spatula or a piece of wood wetted with a soap and water solution.
