Everbuild Stixall Extreme Power - Grey 290ml (Box of 12) 
Everbuild Everflex 115 G.P Building Mastic - Brown 285ml (Box of 25) 
Soudal Soudafoam Gap Filler Hand Held 750ml 
Timco Cloth Tape White - 50m x 48mm 
OX Pro Grout Remover 
Bond It Aerosol Spray Adhesive 500ml Beige - Box of 12 
Bond It Felt Adhesive - Black 1L 
Hambleside Danelaw (HD TVA) Tile Vent Adaptor for TV15 Range 
Over Fascia Vent, 10mm 
OB1 Diamond Crystal Clear Universal Sealant & Adhesive 290ml 
ALM Code 3 Milled Lead - 210mm x 3m 
Everbuild Filler Coat – White 5 Litre 
ALM Code 4 Milled Lead - 150mm x 3m 
Sika MultiSeal Self Adhesive Bituminous Sealing Tape - Grey (225mm x 10m) 
ALM Code 7 Milled Lead - 450mm x 6m 
Gorilla Glue - Dark Brown 60ml 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Hambleside Danelaw Double Pantile Vent TV15/2 - Brown (Box of 5) 
Timloc Plain Tile Vent Terracotta (Box of 14) 
Code 3 Cast Lead - 450mm x 3m 
ALM Code 6 Milled Lead Flashing - 240mm x 3m 
Everbuild 406 Stabilising Solution - 5 Litre 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
