Lead Sheet Restorer - G3 
Ronseal Super Flexible Smooth Finish Filler - 300ml 
Timloc Non-Profile Tile Vent Brown (Box of 8) 
FrogTape® Delicate Surface Masking Tape - Yellow 24mm x 41.1m 
Code 7 Cast Lead - 180mm x 6m 
Everbuild Stick2 Industrial Superglue HV – Clear 50g (Box of 25) 
OX Pro Rodless Sealant Gun - Up to 400ml 
Everbuild 405 Path & Patio Seal – 5 Litre 
Bond It Indian Stone Sealer - Clear 5L 
Everbuild Triple Action Wood Treatment – 25 Litre 
Everbuild Heat Mate Silicone Sealant - Red 295ml (Box of 12) 
ALM Code 3 Milled Lead - 914mm x 6m 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Everbuild Black Jack 908 DPM – 5 Litre 
Gorilla Tape - Black (48mm x 11m) 
OX Pro Small Trowel - 200 x 75mm 
FreeFlow Round Gutter System Stopend External - Black 
OX Tools OXIT Sealant & Adhesive - Black 290ml (Box of 12) 
FloPlast Universal Hopper, Brown – 65-68mm 
Hambleside Danelaw TV15/4 Tile Vent - Slate Grey (Box of 5) 
Code 4 Cast Lead - 1200mm x 6m 
Hambleside Danelaw TV15/4 Tile Vent - Black (Box of 5) 
OX Pro Double Handle Pool Trowel 
FloPlast Square Line Stop End Outlet Black – 114mm x 65mm 
Bond It B1 Fire Resistant PU Aerosol Expanding Foam - Pink 750ml 
Ronseal 6 Year Anti Mould Paint - White Matt 2.5L 
Eco-Shovel & Hard Brush Black Large Pan 
Everbuild PVCu Solvent Cleaner – 1 Litre 
ALM Code 5 Milled Lead - 760mm x 6m 
Everbuild STICK2® All-Purpose Contact Adhesive – 5 Litre 
Everbuild General Purpose Silicone - Black 290ml (Box of 12) 
Klober 15x9 Tile Vent - Antique Red KG9690-0116 (Box of 10) 
SikaBond MS Wood Floor Gun Grade - Parquet Brown 600ml 
Spax Phillips Ph3 Drill Bits - 25mm (Pack of 5) 
Timloc Universal Slate Roof Vent Pipe Adaptor Kit 
Everbuild Clear Fix – 290ml (Box of 12) 
Uses
The Everbuild Stick2 Carpet Fix Spray is a high-quality adhesive spray with a high tack, making it perfect for bonding carpets and various other substrates. Everbuild delivers this product in a spray can, allowing easy and faster application. Suitable for not only bonding carpets but multiple other surfaces, including;
- Polyurethane
- Foam back carpets
- Carpet tiles
- Underlay
- Paper felt
- Cork
- Rubber
- Metal
- Leather
- Most plastics
Preparation
It's essential to prepare the surface before application to achieve optimal results. First, clean the surface by removing contaminants that can hinder the adhesion, including dirt, dust, oil, grease, etc. Leaving all substrates bonded in a warm area to heat up slightly is recommended, preventing longer curing times and glue lines.
Application
- Shake the can thoroughly before using it.
- You can adjust the nozzle to change the width of the spray to your desire
- Apply to both surfaces from about 15-20 cm away, then bring together.
- For a stronger bond, you can coat the substrates three times in one application and allow the solvents to evaporate, which takes 30 seconds, then bring the surfaces together.
Limitations
- This product is not suitable for fixing vinyl floor tiles
- Do not apply to polystyrene
- This should not be applied to cellulose-painted surfaces
- Do not apply to surfaces that leak bitumen or tar
