Armatool Mop Heads Size 12 
Ronseal One Coat Blackboard Paint - Black 250ml 
Soudal Solvent-Free Trade Grab Adhesive - White 290ml 
Cromar Vent 3 Classic Breathable Membrane - 1m x 25m 
Everbuild 203 Accelerator & Frostproofer – 5 Litre 
Code 7 Cast Lead - 450mm x 6m 
Soudal Trade Sanitary Silicone - White 290ml 
Freeflow 68mm Round Down Pipe Shoe - White 
Soudal Parquet & Timber Sealant - Dark Grey 290ml 
Ronseal Multi Purpose Wood Filler - Natural 930g 
SikaBond MS Wood Floor Gun Grade - Parquet Brown 600ml 
Bond It Roof-Mate Roof & Gutter Sealant - Black EU3 
Code 8 Cast Lead - 850mm x 3m 
Leather Roofers Tool & Nail Pouch, Dark Brown 
Cromar Vent 3 Classic Breathable Membrane - 1.5m x 50m 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml (Box of 12) 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Code 5 Cast Lead - 240mm x 3m 
ALM Code 4 Milled Lead - 800mm x 3m 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml (Box of 12) 
Soudal Fix ALL High Tack – Black 290ml (Box of 12) 
Everbuild Tecnic Foil Pack Gun 
Everbuild Smart Tack Handy – 500ml 
Uses
The Stick2 Superglue GP by Everbuild is ideal for perfectly fitting surfaces that need to be bonded, with its curing time of only 10-15 seconds. It offers small but effective gap-filling properties suitable for up to 0.1mm and is a convenient single-component adhesive. It's an environmentally friendly alternative glue, and this is due to its economical usage alongside its solvent-free composite. Surfaces that this product is excellent for bonding include;
- Plastics
- Metals
- PVCu
- EPDM
Preparation
Surfaces to be bonded must be cleaned, dry and free from contaminants that can hinder the adhesion, such as dirt, dust, oil, grease, etc. To avoid chilling glue lines, store surfaces in a warm environment before bonding, and when commencing the application, ensure there's a relative humidity of 50%+
Application
- Unscrew the cap of the product
- Squeeze the product to one surface only
- Press the surface and hold them together for at least 10 seconds, taking care with the aligning as the open time is short.
Limitations and Notes
- This product should be used in applications that are constantly immersed in water.
- Ensure the surfaces are degreased before bonding
- Ensure surfaces are close fitting as it doesn't bridge gaps
- Do not use on surfaces or products that are bitumen or tar-leaching
