Hambleside Danelaw CON6+ Dry Ridge 6m Kit 
Lead Hall Fixing Clips - Pack of 50 
Everbuild Exact Gap Foam - 750ml (Box of 12) 
Soudal 5 Minute D4 Wood Adhesive Liquid – 750g 
ALM Code 3 Milled Lead - 510mm x 6m 
Bostik Cementone PVA - 5 Litre 
Everbuild 408 Super Seal - 5 Litre 
Code 8 Cast Lead - 600mm x 6m 
Hambleside Danelaw TV15/4 Tile Vent - Slate Grey (Box of 5) 
ALM Code 7 Milled Lead - 800mm x 3m 
Everbuild PVCu Cream Cleaner - 1 Litre 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 50M 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml 
Soudal Adhesive Remover - 400ml 
Everbuild 701 Non-Slip Tile Adhesive – White 7.5kg 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – White 300ml 
FloPlast Half Round Gutter Angle 135°, Brown – 112mm 
Ronseal Precision Finish Brush - 0.5 Inch 
Freeflow 68mm Round Down Pipe Shoe - Black 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 1.2Kg 
Everbuild Showerproof Bathroom Silicone - Clear 280ml (Box of 12) 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 2.5 Litre 
Thompson's Water Seal - 1L 
Uses
The Anti-Condensation Paint by Ronseal is a high-quality, uniquely formulated paint that completely controls condensation, mould, and general damp issues. This paint, when applied, delivers an added layer of insulation, protecting the paint and your wall from unsightly damage. This type of paint is suitable for scrubbing down when cleaning, making it perfect for bathrooms and kitchens.
Preparation
Before commencing the application, you should prepare the surface. Clean it down to remove any contaminants, and if the surface has mould present, use a dedicated mould killer to remove it. You should not sand it away; all this does is spread the pores, which causes it to spread.
Application
- When opening the tin, thoroughly stir it to mix all the pigments.
- Apply the paint directly to the wall using a brush or roller, ensuring you don't spread it too thinly.
- Allow 4 hours for the first coat to dry, then apply a second. The surface will be touch dry in 2 hours but suitable for painting over in 4 hours.
Aftercare
This paint can be used as a top coat or undercoat; if an undercoat is your intention, you should wait 4 hours for it to dry before applying it. Any leftover paint on tools should be removed and cleaned using warm, soapy water.
