Code 6 Cast Lead - 180mm x 3m 
Klober Universal Tile Vent Antique Red KG9854 (Box of 10) 
FloPlast Half Round External Stop End, White – 112mm 
Colron Liquid Scratch Cover - Medium 14ml 
Ronseal Multi Purpose Smooth Finish Filler - 1.2kg + 50% Free 
Code 3 Cast Lead - 760mm x 6m 
Code 7 Cast Lead - 390mm x 6m 
ALM Code 8 Milled Lead - 300mm x 3m 
ALM Code 4 Milled Lead - 510mm x 3m 
Klober Single Pantile Vent - Slate Grey KG9860-0429 (Box of 10) 
Everbuild Griptite Construction Adhesive - 350ml 
Sika Damp-Proof Slurry Grey - 25kg 
Soudal 30 Min D4 Gel PU Wood Adhesive Trade - 290ml 
Bond It B3 Fill And Fix Expanding Foam Gun Grade - Beige 750ml 
OX Pro Dry Wall External Corner Trowel - 100mm x 125mm 
Thompson's Emergency Instant Repair Aerosol - Black 450ml 
Lead Roofing Wood Core Roll (50mm x 2.4m) 
Thompsons One Coat Roof Seal - Black 5L 
Cromar Bitumen Primer – Black 1 Litre 
Everbuild Black Jack 906 Bitumen Roofing Emulsion – 5 Litre 
Bond It B1 Fire Resistant PU Aerosol Expanding Foam - Pink 750ml 
Uses
Pro 45P Superfast Wood Glue is excellent for use as a wood glue. This product has remarkable resilience to high humidity, water and general weathering. Perfect for bonding windows and door frames, this product also works well in corner connections, which is required to meet class D4 according to EN204.
Preparation
This product doesn't require any initial priming before the application. However, you must prepare the surface to achieve optimal adhesion. Complete this by removing contaminants such as dirt, dust, oil, grease and similar impurities.
The way the bonding properties of this product work is through the moisture in the air. Therefore, if you lightly spray the surface with water, it will accelerate the curing speed.
This product will bond to most surfaces, such as wood, concrete, stone and other common construction materials. Still, some plastics, such as PE, PTFE and PP, won't be compatible.
Application
- Apply the adhesive to one of the surfaces using a fine-toothed comb or brush to spread the glue.
- Bring the two surfaces together within 5 minutes and clamp the surfaces together. It will take around 30 minutes for this product to cure fully.
