Siroflex Seal & Fix Hybrid Adhesive 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml 
ALM Code 5 Milled Lead - 1200mm x 6m 
Everbuild ASBO Graffiti Remover - 400ml 
Ronseal Stays White One Coat Non-Drip Paint - Satin 2.5L 
OX Pro Tuff Spirit Level - 1200mm 
Everbuild Forever White Powder Wall Tile Grout – 1.2kg 
Soudal Fix ALL X-treme Power - White 290ml 
Everbuild Everflex 200 Contractors LMA Silicone - White 295ml 
Bond It Extruder for Foil Sausages - Silver 600ml 
ALM Code 8 Milled Lead - 450mm x 6m 
Everbuild Coving Adhesive & Joint Filler - White 290ml (Box of 12) 
Thompson's Patio & Block Paving Seal - Wet Look 5L 
Bond It Glass Cleaner - Clear 1L 
Soudal Repair Express Cement – Grey 900ml 
Ronseal Quick Drying Smooth Finish Filler - 600g 
Timloc Non-Profile Tile Vent Black (Box of 8) 
Everbuild External Frame Sealant - Brown 290ml (Box of 12) 
Cromar Black Bitumen Paint – 1 Litre 
Everbuild KOS Black Fire Cement - 500g 
Ox Tools Spectrum Superior Diamond Blade 115/22.23mm 
FloPlast Round Line Downpipe Clip, White 
ALM Code 6 Milled Lead Flashing - 360mm x 3m 
Everbuild Clear Fix – 290ml 
FloPlast Square 112° Offset Downpipe - White 
Pinkgrip Dryfix Applicator Gun 
Uses
The Soudaduct by Soudal is an acrylic polymer-based, plasto-elastic, solvent-free HVAC ducting sealant suitable for sealing every type of metal duct. It offers excellent adhesion on both galvanised and stainless steel, yet remains flexible and can even be painted once it is fully cured, allowing it to fit in with it's surroundings. It's suitable for joints with a movement max of 12.5% and achieves all requirements in DW144 standards and regulations.
Preparation
Before commencing the application, ensure that the surfaces involved in the application are free from dirt, dust, grease, oil, etc; after you've cleaned them, make sure the surface is bone dry.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled.
- Place it into a suitable sealant applicator tool and apply the material to the surface.
- Smooth it down using a smoothing tool, putty knife, etc, to a smooth finish.
- Ensure that all gaps, cracks and areas of the duct system are sealed to ensure an airtight system.
Limitation and Notes
- Do not apply this product in areas subject to constant water immersion.
- This product is suitable for painting, but preliminary tests must be completed to ensure compatibility before finishing the full job.
- Allow the sealant to cure for 12-24 hours before using the air system.
- This product is not suitable for external use.
