Code 4 Cast Lead - 210mm x 6m 
Code 3 Cast Lead - 390mm x 3m 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
Freeflow Square Gutter System Running Outlet - Black 
FloPlast Half Round Internal Stop End, White – 112mm 
OX Pro Chalk Refill, White – 226g 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 200) 
When you’re installing your Stronghold Fibreglass roofing, you need Stronghold Fibreglass Catalyst. This catalyst allows both the base resin layer at the bottom of the installation and the topcoat layer at the top of the installation to be cured properly.
Fibreglass roofs are made of three layers. A layer of fibreglass resin is spread over the roof first to create a smooth surface. Then a layer of GRP matting is installed that forms the solid core of the fibreglass. Finally, a layer of topcoat is spread out to secure the matting and protect it. The Stronghold Fibreglass Catalyst is vital to making sure that both the first and third layers can cure properly.
When mixing catalyst batches, make sure to follow all installation instructions and safety precautions. Fibreglass may not be suitable for inexperienced DIYers.
