Ulti-Mate Bold Roll Brown Tile Vent 
Code 7 Cast Lead - 914mm x 6m 
FloPlast Ogee Fascia Bracket, Black 
Everbuild Jumbo Mitre Fast Kit Superglue & Activator 
Timloc Over Fascia Vent - 1m 
Timco Chalk Line Set 
Everbuild Multi-Use Wonder Wipes Tub (Box of 12) 
FloPlast Universal Hopper, Black – 65-68mm 
Bond It Contractors PVA - 5L White 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml (Box of 12) 
Bond It Power Proof Concentrated Waterproof Render Admixture - 1 Litre 
Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml 
ALM Code 5 Milled Lead - 510mm x 6m 
Soudal Fix ALL Turbo - Black 290ml 
Over Fascia Vent, 10mm 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 25M 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Standard Brush 4-Inch 
Permavent Easy Slate 500 - Pack of 20 
Cromar Vent 3 Air High Performance Breathable Membrane 1m x 50m 
Timco Collated Drywall Self Drilling Screws 
Everbuild KOS Fire Cement Buff – 2kg 
Everbuild Black Jack 904 Roof Felt Adhesive – 2.5 Litre 
Ronseal Diamond Hard Doorstep Paint - Black Satin 750ml 
Ronseal Ultimate Finish Decking Pad Kit 
Ox Pro Ultraflex Finishing Trowel - 16" (405mm x 110mm) 
ALM Code 7 Milled Lead - 510mm x 6m Roof Felt Adhesives
Best Sellers
-
Samac Roof Hip Irons – (3mm, 4mm and 5mm)
From: £6.49 Incl VAT £5.41 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Gorilla Wood Glue – Brown 532ml
£13.99 Incl VAT £11.66 Excl VAT Add to basket -
Freeflow 65mm Square Gutter Drain Pipe Shoe – White
£2.09 Incl VAT £1.74 Excl VAT Read more -
Soudal Parquet & Timber Sealant – Dark Grey 290ml
£2.99 Incl VAT £2.49 Excl VAT Add to basket -
OX Speedskim Semi Flex Blade Only
From: £20.49 Incl VAT £17.08 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild PVC Hazard Tape – Black/Yellow (50mm x 33m)
£7.99 Incl VAT £6.66 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
