Code 3 Cast Lead - 600mm x 3m 
Everbuild Industrial Superglue HV - Clear 50g 
Code 6 Cast Lead - 1000mm x 3m 
FloPlast Half Round Downpipe Shoe, Brown – 68mm 
10 x Permavent Black Breather Membrane – 1m x 50m 
Soudal Soudafoam Window & Door Gun Grade – 750ml (Box of 12) 
Resiblock Indian Sandstone Sealer Invisible - 5 Litre 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - Black 
FloPlast Square Line Pipe Connector Black 
ALM Code 4 Milled Lead - 914mm x 6m 
Stanley Dynagrip Chisel Knife - 25mm 
Timco Anti-Slip Tape 
Easy-Trim Universal Dry Verge System - Grey (Box of 50) 
Everbuild Maximum Torque - White 290ml (Box of 12) 
Everbuild 501 PVA - 2.5 Litre 
Code 4 Cast Lead - 760mm x 3m 
Everbuild Stick2 Superglue De-Bonder - 20ml 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 38mm (2000 Pieces) 
Ronseal Precision Finish Brush - 1.5 Inch 
Bond It SBR Admixture - White 5L 
Timloc Universal Slate Roof Vent Adaptor Only 
Ronseal Stays White Ultra Tough White Gloss Paint - 750ML 
Soudal Sealant Remover – 400ml 
Everbuild Lead Mate Patination Oil – 500ml 
Timco Bulk Pallet 50 Packs - Classic Multi-Purpose Screws 4.0 x 50 Double Countersunk - A2 Stainless Steel - 200 Box 
Ronseal One Coat Water-Based Tile Paint - Magnolia Satin 750ml 
Gorilla Super Glue Gel Twin Pack - Clear 3g 
ALM Code 7 Milled Lead - 800mm x 6m 
ALM Code 3 Milled Lead - 180mm x 3m 
Everbuild Stixall Extreme Power - White 290ml (Box of 12) 
Timloc Felt Support Tray 600mm 
ALM Code 8 Milled Lead - 760mm x 3m Roof Felt Adhesives
Best Sellers
-
Everflex Premium+ 450 Builders Silicone – Oak 300ml (Box of 25)
£132.75 Incl VAT £110.63 Excl VAT Add to basket -
Bond It Felt Adhesive – Black 1L
£12.49 Incl VAT £10.41 Excl VAT Add to basket -
Ronseal Stays White One Coat Non-Drip Paint – Matt 2.5L
£24.99 Incl VAT £20.83 Excl VAT Read more -
FloPlast Universal Hopper, White – 65-68mm
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Cromar Black Bitumen Paint – 2.5 Litre
£15.99 Incl VAT £13.33 Excl VAT Read more -
Axgard 3mm Solid Polycarbonate Sheet, Clear
From: £15.26 Incl VAT £12.72 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
