Ronseal Quick Drying Radiator Spray Paint - White Satin 400ml 
IKO 5U Eaves Protection Strips - 16m x 330mm 
OX Trade Metric Tape Measure - 8m 
Klober Uni-Plain Roof Tile Vent Adaptor & Flexipipe - KG992800 
Bond It Mirror Pro Adhesive - White EU3 
BORA - PM-4550 Adjustable Speedhorse XT (Set of 2) 
Sikabond PVA - White 5 Litre 
Ronseal 6 Year Anti Mould Paint - White Silk 750ml 
Timco Aluminium Hawk 
Everbuild Opti-Mix Cement Colourant – Black 1 Litre 
OX Pro Tuff 3 Level Kit - 600, 1200 and 1800mm 
Soudal Compact Foam Gun PU Foam 
Soudal Fix ALL High Tack – Black 290ml (Box of 12) 
Everflex Premium+ 450 Builders Silicone – Oak 300ml (Box of 25) 
Everbuild 204 Evermix 3 in 1 - 5 Litre 
Cromar Protect 1F Non-Breathable Roofing Felt – 1m x 15m 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml (Box of 12) 
Standard Brush 4-Inch 
ALM Code 8 Milled Lead - 600mm x 6m 
IKO Super Shed Felt - Black 8m Roll 
Bond It Barrier Tape Yellow and Black - 70mm x 500M 
ALM Code 6 Milled Lead Flashing - 150mm x 6m 
Sika Stone Protector - Clear 5 Litre 
Permavent Easy Slate 500 - Pack of 20 
Code 5 Cast Lead - 450mm x 6m 
Bond It Mega Foam Gun/Aerosol PU Expanding Foam - Beige 500ml Roof Felt Adhesives
Best Sellers
-
Bostik Cementone Integral Waterproofer – 2.5L
£5.99 Incl VAT £4.99 Excl VAT Read more -
Evo-Stik 873 Flooring Adhesive – 1 Litre
£12.08 Incl VAT £10.07 Excl VAT Read more -
Bond It Gripbond Pro Max Adhesive – White EU3
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Code 7 Cast Lead – 180mm x 3m
£54.26 Incl VAT £45.22 Excl VAT Add to basket -
Everbuild STICK2® All-Purpose Contact Adhesive – 5 Litre
£44.99 Incl VAT £37.49 Excl VAT Add to basket -
Everbuild 703 Fix & Grout Tile Adhesive – White 750g
£7.49 Incl VAT £6.24 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
