Thompson's Patio & Block Paving Seal - Natural 5L 
Hambleside Danelaw Double Pantile Vent TV15/2 - Black (Box of 5) 
Samac Aluminium Clout Nails - 50mm x 3.35mm 10kg Box 
Everbuild EuroScrim Plasterboard Tape – 100mm x 90m 
Standard Brush 2-Inch 
Bond It Duct Tape - Silver 48mm x 45M 
Soudal Soudatherm Roof 250 - 800ml 
Cromar All Weather Roof Coat – Black 2.5 Litre 
Everbuild Stick2 Carpet Fix Spray - 500ml 
Timloc Universal Slate Roof Vent 
Cromar Vent 3 Pro Breathable Membrane 1m x 50m 
Everbuild 404 Fungicidal Wash – 1 Litre 
Code 7 Cast Lead - 240mm x 3m 
Cromar Protect 1F Non-Breathable Roofing Felt – 1m x 15m 
ALM Code 6 Milled Lead Flashing - 1200mm x 6m 
Klober Single Pantile Vent - Slate Grey KG9860-0429 (Box of 10) 
Everbuild Black Jack 901 Black Bitumen Paint – 2.5 Litre 
Bostik Penetration Primer For Roofs, Black - 5 Litre 
FloPlast Square to Round Downpipe Adaptor - Black 
Hambleside Danelaw Felt Lap Vent 
Soudal Butyrub Non-Setting Mastic - Grey 300ml 
Everbuild 102 Butyl Glazing Compound - Brown 2kg 
Spax Magnetic Bit Holder - 1 Piece 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
OX Pro Harling Trowel - 165mm X 165mm 
Cromar Cold Gritting Solution - Black 25 Litres 
10 x Timloc 3014C Over Fascia Ventilation System 1M - Black 
ALM Code 3 Milled Lead - 450mm x 3m 
ALM Code 4 Milled Lead - 150mm x 6m 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml Roof Felt Adhesives
Best Sellers
-
Everbuild Forever White Grout Reviver – 200ml
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Everbuild Stixall Extreme Power – White 290ml
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Ronseal uPVC Cleaner – 750ml
£9.99 Incl VAT £8.33 Excl VAT Add to basket -
Code 4 Cast Lead – 600mm x 3m
£105.67 Incl VAT £88.06 Excl VAT Add to basket -
Evo-Stik Liquid Nails Solvent Free – Buff 290ml
£4.99 Incl VAT £4.16 Excl VAT Add to basket -
Klober Profile-Line Twin Plain Tile Vent – KG9861 (Various Colour)
From: £46.43 Incl VAT £38.69 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
