Bond It The Beast PU Adhesive - Brown 250ml 
Code 6 Cast Lead - 180mm x 6m 
FloPlast Half Round Gutter 90° Bend, White – 112mm 
Bond It De-Bond Mate Silicone Sealant Remover Gel - 125ml Amber/Brown 
OX Trade 14 Drive Socket Set - 35 Piece 
Code 3 Cast Lead - 240mm x 6m 
Thompson's Emergency Roof Repair Mastic - Black 750ml 
Easy-Trim Universal Dry Verge Unit - Black 
Code 8 Cast Lead - 240mm x 6m 
IKO Easymelt Bonding Bitumen Keg - 10kg 
Samac Silicone Bronze Nails - 1kg (31mm x 1.8mm) 
Everbuild Quick Drying Clear Varnish - Gloss 250ml 
Armatool Slate Rip - Stainless Steel 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml 
Easy-Trim Lead R Flashing Smooth – 450mm x 5m 
SikaBond MS Wood Floor Gun Grade - Parquet Brown 600ml 
Stanley Dynagrip Chisel Knife - 25mm 
Bond It B1 Fire Resistant PU Aerosol Expanding Foam - Pink 750ml 
ALM Code 4 Milled Lead - 1600mm x 6m 
Klober Profile-Line Twin Plain Tile Vent - Slate Grey KG9861-0429 (Box of 10) 
Sikagard Woodworm Killer - 5 Litre 
Pinkgrip Dryfix Applicator Gun 
ALM Code 3 Milled Lead - 510mm x 3m 
BORA Centipede 2ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Klober Thin Line Vent - Black KG9855-3-0450 (Box of 10) 
OX Tools Plasterers Bucket, Blue – 25 Litre 
Hambleside Danelaw Double Pantile Vent TV15/2 - Terracotta (Box of 5) 
Everbuild Lead Mate Patination Oil – 500ml 
ALM Code 8 Milled Lead - 180mm x 6m 
Timloc 1205 Underfloor Vent Horizontal Duct Adapter - 110mm 
Bond It Decking Cleaner - Clear 5L 
ALM Code 7 Milled Lead - 390mm x 3m 
FloPlast Square Line External Stop End Black – 114mm 
Evercryl Emergency Roof Repair - Clear 310ml 
Bond It Mega Foam Gun/Aerosol PU Expanding Foam - Beige 750ml 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Brown (Box of 5) 
Soudal Soudalead PB Lead Sealant - Grey 300ml 
Everbuild Stick2 All Purpose Clear Adhesive - 30ml 
Lead Sheet Restorer - G1 
Isoflex Liquid Rubber - 4.5L 
Standard Brush 2-Inch 
Ronseal Diamond Hard Doorstep Paint - Tile Red Satin 750ml 
Samac Copper Wire Coil 36m x 2mm 
Ronseal One Coat Stays White Radiator Paint - Matt 750ml 
Everbuild Weather Mate Gap Filler & Adhesive - Black 295ml (Box of 25) 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 5 Litre 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml 
Everbuild Stixall Extreme Power – White 290ml Roof Felt Adhesives
Best Sellers
-
Code 4 Cast Lead – 1000mm x 6m
£348.43 Incl VAT £290.36 Excl VAT Add to basket -
Soudal Lead Sheet Sealant 290ml – Grey
£7.99 Incl VAT £6.66 Excl VAT Read more -
Ronseal Ultra Tough Hardglaze Clear Varnish – 5L
£89.99 Incl VAT £74.99 Excl VAT Read more -
Siroflex Heavy Duty PVCu Solvent Cleaner – 1L
£15.99 Incl VAT £13.33 Excl VAT Add to basket -
Everbuild Instant Nails – White 290ml (Box of 12)
£20.88 Incl VAT £17.40 Excl VAT Add to basket -
ALM Code 6 Milled Lead Flashing – 210mm x 3m
£53.81 Incl VAT £44.84 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
