Soudal Pro 30D Waterproof Wood Adhesive - 750g 
Bond It Economy Sealant Gun - Blue 300ml 
Code 6 Cast Lead - 1200mm x 6m 
ALM Code 5 Milled Lead - 450mm x 3m 
Soudal Genius Gun Gap Filler Expanding Foam - 600ml 
Code 7 Cast Lead - 240mm x 3m 
Ronseal Precision Finish Brush - 1 Inch Angled 
OX Pro Heavy Duty Wrecking Bar - 24" 
Everflex Premium+ 450 Builders Silicone – Oak 300ml (Box of 25) 
Bond It Patination Oil 1L 
OB1 Diamond Crystal Clear Universal Sealant & Adhesive 290ml 
Hambleside Danelaw TV15/7 Tile Vent - Slate Grey (Box of 5) 
YBS SuperQuilt Lite Multi-Layer Quilted Foil Insulation, 1.5m x 10m 
OX Pro Brick Hammer - 24 oz 
Everbuild Bath & Kitchen Sealant - 200ml 
Easy-Trim Universal Dry Verge System - Grey (Box of 50) 
OX Tools Trade Heavy Duty Chalk Line Reel 30m / 100ft 
Everbuild Mammoth Clear Weatherproof Tape 
Soudal Mitre Kit 50g + 200ml - Clear 
Soudal Soudaduct - Grey 300ml 
Sika Damp-Proof Slurry Grey - 25kg 
Timco Pipe Shears 
Cromar Bitumen Trowel Mastic - Black 5L 
Everbuild Triple Action Wood Treatment – 25 Litre 
Klober Flexipipe 75/100mm - (KG972400) 
Everbuild Stick2 Industrial Superglue HV – Clear 50g (Box of 25) 
OX Trade Torpedo Level 230mm / 9in 
ALM Code 3 Milled Lead - 800mm x 3m 
Everbuild Pinkgrip SF Solvent Free Adhesive – 380ml (Box of 12) Roof Felt Adhesives
Best Sellers
-
8 x Cromar Vent 3 Pro Breathable Membrane 1m x 50m
£399.99 Incl VAT £333.33 Excl VAT Add to basket -
Code 3 Cast Lead – 1600mm x 6m
£411.26 Incl VAT £342.72 Excl VAT Add to basket -
Everbuild Everflex 200 Contractors LMA Silicone – Transparent 295ml
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Code 5 Cast Lead – 450mm x 6m
£197.06 Incl VAT £164.22 Excl VAT Add to basket -
Code 8 Cast Lead – 240mm x 6m
£165.65 Incl VAT £138.04 Excl VAT Add to basket -
Bond It Barrier Tape Red and White – 70mm x 500M
£8.99 Incl VAT £7.49 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
