ALM Code 7 Milled Lead - 180mm x 3m 
ALM Code 5 Milled Lead - 150mm x 6m 
OB1 Grip & Grab Waterproof Adhesive 
Bond It Saves Nails Instant Grab Adhesive - EU3 Beige 
OX Pro Tuff Spirit Level - 1200mm 
Code 7 Cast Lead - 450mm x 6m 
Leadax Lead Free Flashing Alternative 450mm (6M Rolls) 
Siroflex Heavy Duty PVCu Solvent Cleaner - 1L 
Code 8 Cast Lead - 300mm x 3m 
Timloc Non-Profile Tile Vent Black (Box of 8) 
ALM Code 8 Milled Lead - 180mm x 3m 
Everbuild Superflow Sealant Gun - C3 (290ml - 310ml) 
ALM Code 4 Milled Lead - 150mm x 3m 
Everbuild 506 Universal Contractors PVA - 5Kg White 
Ronseal Stays White Ultra Tough White Matt Paint - 750ML 
ALM Code 3 Milled Lead - 600mm x 6m 
Ronseal Exterior Yacht Varnish - Satin 250ml 
Cromar Vent 3 Classic Breathable Membrane - 1.5m x 50m 
Hambleside Danelaw Double Roman Tile Vent TV15/3 - Antique Red (Box of 5) 
Thompson's Water Seal - 5L 
Soudal Trade Sanitary Silicone - White 290ml (Box of 12) 
Siroflex Trade High Viscosity Superglue - 50g 
Timloc Inline Slate Vent Black 
Ronseal Anti-Condensation Paint - Matt White 750ml 
Ronseal Ultimate Finish Interior Floor Applicator Refill Pads 
Timco Professional Wire Strippers 
Thompson's Patio & Block Paving Seal - Natural 5L 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml 
Bond It SBR Admixture - White 2.5L 
Everbuild Everflex 200 Contractors LMA Silicone - White 295ml 
OX Pro Jab Saw - 6.5" / 165mm & Holster Pack 
FloPlast Square 112° Offset Downpipe - White 
Spax Phillips Ph3 Drill Bits - 25mm (Pack of 5) 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml Roof Felt Adhesives
Best Sellers
-
Wakaflex Lead Alternative, Lead Free Flashing
From: £56.70 Incl VAT £47.25 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Code 5 Cast Lead – 450mm x 3m
£97.10 Incl VAT £80.92 Excl VAT Add to basket -
Bond It Mould Stop – Clear 1L
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Bostik Flexacryl Roof Repair Paint – 1kg
From: £19.99 Incl VAT £16.66 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
OX Pro Dry Wall External Corner Trowel – 100mm x 125mm
£13.08 Incl VAT £10.90 Excl VAT Add to basket -
Timloc Universal Dry Fix Round Ridge End Cap
From: £6.99 Incl VAT £5.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
