Restec GRPROOF 1010 Base Coat Resin - 10kg 
OX Pro Jab Saw - 6.5" / 165mm & Holster Pack 
ALM Code 7 Milled Lead - 1000mm x 3m 
Everbuild Showerproof Bathroom Silicone – White 280ml (Box of 12) 
Soudal Genius Gun Pipe & Plumbing Foam – 600ml 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – White 300ml 
Timco Impact Driver Bit Set 
Ronseal Stays White Ultra Tough White Satin Paint - 750ml 
Bond It Patio Blaster - Clear 5L 
Code 8 Cast Lead - 300mm x 6m 
IKO Super Shed Felt - Green 8m Roll 
ALM Code 5 Milled Lead - 450mm x 3m 
OX Pro Moulding Bar - 10" / 250mm 
OX Trade Metric Tape Measure - 8m 
Klober Profile-Line Limarech Tile Vent - Slate Grey KG9859-3-0429 (Box of 10) 
Everbuild Stick2 Carpet Fix Spray - 500ml 
Thompson's Patio & Block Paving Seal - Natural 5L 
Cromar Vent 3 Light Breathable Membrane - 1m x 50m (Full Pallet of 56) 
Code 5 Cast Lead - 850mm x 6m 
Easy-Trim Ridge F Universal Dry Ridge System - 3m Kit 
ALM Code 8 Milled Lead - 210mm x 6m 
OB41 High Performance Carburettor Cleaner - 400ml 
ALM Code 4 Milled Lead - 240mm x 3m 
Ronseal Stays White 2in1 Paint & Primer - Gloss 750ml 
OB1 Grip & Grab Waterproof Adhesive 
FloPlast Square Fascia Bracket Black – 114mm 
Freeflow 68mm Round Down Pipe Shoe - White 
Bond It Frame-Mate Door & Window Sealant - Brown EU3 Roof Felt Adhesives
Best Sellers
-
Soudal PVCu Gap Filler, White – 300ml
£12.99 Incl VAT £10.83 Excl VAT Add to basket -
Everbuild Stixall Extreme Power – Natural 290ml (Box of 12)
£39.96 Incl VAT £33.30 Excl VAT Read more -
Soudal Fix ALL Turbo – White 290ml (Box of 12)
£72.00 Incl VAT £60.00 Excl VAT Add to basket -
Soudal Grab Solvent Based Adhesive, Beige
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Permavent Easy Slate 600 – Box of 100
£124.99 Incl VAT £104.16 Excl VAT Add to basket -
Evo-Stik 873 Flooring Adhesive – 1 Litre
£12.08 Incl VAT £10.07 Excl VAT Read more
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
