Timco Copper Slate Straps 
Code 6 Cast Lead - 914mm x 6m 
Bond It B2 Expanding PU Gun Grade Foam - Beige 750ml 
ALM Code 8 Milled Lead - 210mm x 3m 
Soudal Exterior Frame Silicone - Brown 270ml (Box of 12) 
OX Pro Chalk Refill, Yellow – 226g 
OX Pro Brick Trowel Philadelphia Pattern - 10"/250mm 
ALM Code 5 Milled Lead - 850mm x 6m 
FloPlast Half Round Downpipe Branch 67.5°, Brown 
Bond It Aluminium Foil Tape - 100mm x 45M (Box of 12) 
Everbuild Black Jack 904 Roof Felt Adhesive – 2.5 Litre 
Everbuild Patio Wizard – 1 Litre 
Timco Multi-Fix Masonry Bolts, Hex Head 25pcs - 10.0 x 150mm 
Bond It Duct Tape - Black 48mm x 45M 
Everbuild Stixall Extreme Power - Brown 290ml (Box of 12) 
Gorilla Tape - Black (48mm x 11m) 
Timco Hazard Tape 
Ox Tools OX Pro Aviation Snips With Holster - Right Cut (Green) 
OX Polyzip™ Flex C1 Cutter - 15mm to 28mm 
Spax Magnetic Bit Holder - 1 Piece 
OX Tools Trade Bucket, Black - 15 Litre 
OX Pro Chalk Refill, White – 226g 
Everbuild Overlap & Border Adhesive - White 250g 
Colron Liquid Scratch Cover - Light 14ml 
Everbuild 403 Concrete Hardener & Dustproofer – 5 Litre 
Freeflow 112mm Round Gutter System 90° Gutter Angle - White Roof Felt Adhesives
Best Sellers
-
Everbuild Black Jack 906 Bitumen Roofing Emulsion – 5 Litre
£29.99 Incl VAT £24.99 Excl VAT Add to basket -
Pro GRP Premium Roofing Resin – 20KG
£89.99 Incl VAT £74.99 Excl VAT Read more -
Soudal Silirub 2, White – 300ml (Box of 12)
£73.92 Incl VAT £61.60 Excl VAT Add to basket -
Ronseal Diamond Hard Floor Wax – Natural Oak 2.5L
£49.99 Incl VAT £41.66 Excl VAT Add to basket -
Everbuild Tecnic Foil Pack Gun
£29.99 Incl VAT £24.99 Excl VAT Add to basket -
Everbuild Forever Ivory Silicone Sealant – 295ml (Box of 12)
£58.44 Incl VAT £48.70 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
