Soudal Soudabond 265 Classic Spray - 500ml 
ALM Code 5 Milled Lead - 510mm x 6m 
FloPlast Half Round Downpipe Branch 67.5°, Black 
Timloc Plastic Insulation Retaining Discs - 80mm Red (Pack of 250) 
Timloc Universal Roof Slate Vent + Adaptor kit 
ALM Code 6 Milled Lead Flashing - 600mm x 6m 
Timloc Non-Profile Tile Vent Brown (Box of 8) 
Bondit Monster Mesh Pink 50m x 1m - 160g/m2 
Code 4 Cast Lead - 800mm x 3m 
Soudal Construction Silicone, Clear - 290ml 
Bostik Fast-Tak Permanent Adhesive - 500ml 
Sika Mould Buster – 5 Litre 
Easy-Trim Universal Dry Verge Unit - Black 
Everbuild Black Jack 908 DPM – 5 Litre 
Ronseal Stays White One Coat Non-Drip Paint - Satin 2.5L 
FloPlast Round 92½° Bend - Black 
Hambleside Danelaw Double Pantile Vent TV15/2 - Black (Box of 5) 
Soudal 30 Minute Bond D4 PU Wood Adhesive Liquid – 750g 
ALM Code 4 Milled Lead - 1000mm x 3m 
Leadax Lead Free Flashing Alternative 600mm (6M Rolls) 
Everbuild Forever White Silicone Sealant – 295ml 
Soudal Vaseline Lubricating & Protective Spray – 400ml Flashing Tape
Best Sellers
-
Cromar Black Bitumen Paint – 1 Litre
£12.99 Incl VAT £10.83 Excl VAT Add to basket -
Everbuild Fix & Fill Expanding Foam – 500ml
£9.99 Incl VAT £8.33 Excl VAT Read more -
Bond It B2 Expanding PU Gun Grade Foam – Beige 750ml
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Ronseal Exterior Yacht Varnish – Satin 1L
£24.99 Incl VAT £20.83 Excl VAT Add to basket -
Everbuild Stick2 Industrial Superglue HV – Clear 50g (Box of 25)
£59.99 Incl VAT £49.99 Excl VAT Read more -
Evo-Stik Glazing Silicone Sealant – Clear 280ml
£7.49 Incl VAT £6.24 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
