Soudal Fix ALL Turbo - White 290ml 
ALM Code 3 Milled Lead - 914mm x 3m 
Ronseal Wet Rot Wood Hardener - 750ml 
Easy-Trim Universal Dry Verge System - Brown (Box of 50) 
Timco Twin-Cut C2 Floor-Fix Screws - 4.2mm x 55mm (Tub of 250) 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne 
Restec Flexitec 2020 Roofing Kit - (10m²) 
Soudal Pro 45P Superfast Wood Glue - 750g 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
Everbuild Black Jack 908 DPM – 25 Litre 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 500ml 
OX Pro Wide Head End Cutting Nippers - 200mm 
Bond It Saves Nails Instant Grab Adhesive - EU3 Beige 
Soudal Trade All Weather Sealant - Clear 290ml 
Everbuild Black Jack 902 Bitumen & Flashing Primer – 5 Litre 
Ronseal Anti-Condensation Paint - White 2.5L 
Everbuild Glass Protector - Red (600mm x 25m) 
OX Pro Nylon High Vis Builders Line 105m / 350ft - Cyan 
Bond It Bitumen Paint - Black 2.5L 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
Thompson's Water Seal - 5L 
Code 6 Cast Lead - 800mm x 3m 
Everbuild Silicone Spray - 400ml (Box of 12) 
Easy-Trim Over Fascia Vent - 25mm x 500mm (Box of 50) 
Code 7 Cast Lead - 390mm x 6m 
Klober Double Pantile Vent - Slate Grey KG9858-3-0429 (Box of 10) 
OX Tuff Carbon Marking Pencil Value Pack 
Code 8 Cast Lead - 1200mm x 6m 
FloPlast Square Line Pipe Connector Black 
Everbuild Mitre Fast Industrial Kit Superglue (Box of 24) 
Bond It Trowel Mastic - Black 2.5L 
Klober Thin Line Vent - Antique Red KG9855-3-0116 (Box of 10) 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Antique Red (Box of 5) 
Freeflow 68mm Round Down Pipe Shoe - White 
Ronseal Ultimate Finish Interior Floor Applicator Refill Pads 
ALM Code 4 Milled Lead - 300mm x 6m 
Timloc Castellated Tile Vent Grey (Box of 8) Flashing Tape
Best Sellers
-
Soudal Pro 30D Waterproof Wood Adhesive – 5kg
£34.99 Incl VAT £29.16 Excl VAT Read more -
Timco Trade Instant Bond Mitre Kit 200ml / 50g
£4.99 Incl VAT £4.16 Excl VAT Read more -
Everbuild Seal Rite Smooth Out Tool
£7.99 Incl VAT £6.66 Excl VAT Read more -
Bond It Monster Water Resistant Tape – 48mm x 11m (Black)
£4.99 Incl VAT £4.16 Excl VAT Add to basket -
Freeflow 114mm Square Gutter Fascia – Black
£3.99 Incl VAT £3.33 Excl VAT Read more -
ALM Code 6 Milled Lead Flashing- 1000mm x 6m
£509.76 Incl VAT £424.80 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
