Soudal Repair Express Cement – Grey 290ml (Box of 12) 
Code 5 Cast Lead - 760mm x 3m 
Everbuild Stick2 Industrial Superglue HV – Clear 50g (Box of 25) 
Cromar ProRidge Universal Ridge System 3m Kit 
ALM Code 6 Milled Lead Flashing - 240mm x 6m 
Timco Aluminium Hawk 
Everbuild Plumbers Gold Sealant – Clear 290ml (Box of 12) 
ALM Code 3 Milled Lead - 1200mm x 3m 
Bond It All Weather Roofing Compound - Black 25L 
Freeflow 65mm Square Down Pipe Clip Standard - White 
Silweld Repair Tape, Black - 3m 
Everbuild Lumberjack 5 Minute Wood Adhesive Deal 
Everbuild 502 Wood Adhesive – 1 Litre 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml 
OX Trade Tile Cleaner 120 x 250mm 
Ronseal Trade 10 Year Woodstain - Dark Oak 2.5L 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Black (Box of 5) 
Soudafoam Gap Filler Gun Grade – 750ml 
OX Pro Top Steady Nail-On (Full Kit) Clamp Set 
Everbuild General Purpose Silicone - White 280ml (Box of 12) 
OB41 Foaming Glass Cleaner - 400ml 
Everbuild Forever Ivory Silicone Sealant – 295ml (Box of 12) Flashing Tape
Best Sellers
-
Code 4 Cast Lead – 1600mm x 6m
£559.78 Incl VAT £466.48 Excl VAT Add to basket -
Sika Damp-Proof Slurry Grey – 25kg
£34.99 Incl VAT £29.16 Excl VAT Add to basket -
Ronseal Wet Rot Wood Hardener – 250ml
£12.99 Incl VAT £10.83 Excl VAT Add to basket -
Everbuild Pinkgrip Adhesive Solvent Based – 350ml
£5.99 Incl VAT £4.99 Excl VAT Add to basket -
Evo-Stik 528 Instant Contact Adhesive – 500ml
£17.59 Incl VAT £14.66 Excl VAT Read more -
Code 3 Cast Lead – 210mm x 3m
£25.70 Incl VAT £21.42 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
