DeWalt 18V XR Compact Jobsite Blower Bare Unit - (DCV100-XJ) 
OX Trade Stubby Level - 100mm 
Ronseal Ultra Tough Hardglaze Clear Varnish - 250ml 
Everbuild Plumbers Gold Sealant – Clear 290ml (Box of 12) 
Freeflow 65mm Square Down Pipe Connector - Black 
Everbuild Everflex 195 Siliconised Acrylic Sealant - White 300ml 
Armatool Leather Belt Black, Large 
Ronseal Knot Block Primer & Undercoat - White 250ml 
Everbuild P45 Foam Applicator Gun 
Code 8 Cast Lead - 800mm x 3m 
Ronseal Ultimate Finish Decking Applicator Refill Pads 
Freeflow Square Gutter System Gutter 135° Angle - White 
Timco Heavy Duty Tarpaulin - 4m x 5m 
Everbuild General Purpose Silicone - Black 290ml (Box of 12) 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
IKO Easymelt Bonding Bitumen Keg - 10kg 
Timloc Castellated Tile Vent Brown (Box of 8) 
FloPlast Half Round Internal Stop End, Brown – 112mm 
ALM Code 6 Milled Lead Flashing - 300mm x 6m 
OX Polyzipâ„¢ Flex C1 Cutter - 15mm to 28mm 
ALM Code 8 Milled Lead - 390mm x 3m 
Everbuild Multi-Stick Adhesive - White 350ml 
Armatool Slate Guillotone 
Ronseal Hairline Crack Ready Mix Wall Filler - White 330g 
Soudal Genius Gun Soudafoam Window and Door - 600ml 
ALM Code 5 Milled Lead - 390mm x 3m 
OX Tough Builders Socks (UK 6-11) 
Code 7 Cast Lead - 600mm x 6m 
Klober Plain Roof Tile Vent Adaptor - KG990500 
Code 6 Cast Lead - 150mm x 3m 
Bond It Pro-Mate LMA Silicone - White EU3 
Lead Hall Fixing Clips - Pack of 50 
Easy Prime Porcelain Prime Slurry - 15kg 
Ronseal Trade 10Yr Woodstain Satin Walnut 2.5ltr Brown 
IKO 5U Eaves Protection Strips - 16m x 330mm 
Everbuild 506 Universal Contractors PVA - 5Kg White 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 38mm (2000 Pieces) 
Klober Thin Line Vent - Antique Red KG9855-3-0116 (Box of 10) 
Everbuild Professional Sealant Gun - C3 (280ml - 310ml) 
ALM Code 7 Milled Lead - 300mm x 3m 
Everbuild One Strike Filler - White 2.5L 
Timco Collated Drywall Self Drilling Screws 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 5 Litre Flashing Tape
Best Sellers
-
Cromar Black Bitumen Paint – 5 Litre
£20.50 Incl VAT £17.08 Excl VAT Add to basket -
Everbuild Trowel Mastic – 6kg
From: £17.90 Incl VAT £14.92 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Irwin T20 Torx Screwdriver Bits – (Quantity 10)
£9.99 Incl VAT £8.33 Excl VAT Read more -
Ronseal Multi Purpose Smooth Finish Filler – 600g + 50% Free
£8.49 Incl VAT £7.08 Excl VAT Read more -
ALM Code 3 Milled Lead – 760mm x 6m
£192.58 Incl VAT £160.48 Excl VAT Add to basket -
Ronseal Anti-Condensation Paint – Matt White 750ml
£18.99 Incl VAT £15.83 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
