Ronseal Quick Drying Stain Block - Aerosol White 
ALM Code 4 Milled Lead - 1000mm x 3m 
FloPlast Half Round Running Outlet, White 
ALM Code 8 Milled Lead - 914mm x 6m 
OX Pro Heavy Duty Wrecking Bar - 24" 
Everbuild Mitre Fast Industrial Kit Superglue (Box of 24) 
Ronseal Diamond Hard Floor Paint - Anthracite Satin 750ml 
Ronseal One Coat Water-Based Tile Paint - Black Satin 750ml 
OX Heavy Duty Soft Gel Filled Knee Pad 
OX Tools OXIT Sealant & Adhesive - Clear 290ml (Box of 12) 
Everbuild Everflex Heat Mate Sealant - Red 295ml 
Code 8 Cast Lead - 800mm x 6m 
Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L 
Timloc 1203 Underfloor Vent Horizontal Front Extension + 115mm 
OX Tools Winter Set - Beanie, Socks, Thermal Gloves 
Everbuild Stick2 Carpet Fix Spray - 500ml 
Cromar Alphachem Liquid Mortar Tone - Black 5L 
Soudal Gun & Foam Cleaner Gun Grade - 500ml (Box of 12) 
Soudal Adhesive Remover - 400ml 
Everbuild One Strike Filler - White 2.5L 
Sika Dustproofer – Clear 5 Litre 
Timloc Dry Fix Roll Out Ridge System Pack - Black 6m 
Soudal B1 Fire & Acoustic Expanding Foam Genius - 600ml Flashing Tape
Best Sellers
-
Ronseal Diamond Hard Floor Varnish – Satin 2.5L
From: £44.99 Incl VAT £37.49 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Code 7 Cast Lead – 510mm x 6m
£311.30 Incl VAT £259.42 Excl VAT Add to basket -
Klober Single Pantile Vent – Slate Grey KG9860-0429 (Box of 10)
£215.99 Incl VAT £179.99 Excl VAT Read more -
Ronseal Diamond Hard Floor Varnish – Clear Gloss 5L
£64.99 Incl VAT £54.16 Excl VAT Add to basket -
Soudal Soudafoam Gap Filler Hand Held 750ml
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Everbuild Everflex 200 Contractors LMA Silicone – Transparent 295ml
£7.99 Incl VAT £6.66 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
