FloPlast Half Round Downpipe Branch 67.5°, White 
OX Pro Brick Hammer - 24 oz 
Everbuild Showerproof Bathroom Silicone – White 280ml 
ALM Code 3 Milled Lead - 210mm x 6m 
OX Tools Pro Heavy Duty Flexi Tub - 73L 
Right Hand Klober Contract Dry Verge Unit Brown 
Timco Twin-Threaded Woodscrew Mixed Tray 
Ronseal Precision Finish Brush - 1.5 Inch 
Ronseal Exterior Yacht Varnish - Satin 500ml 
FloPlast Side Fix Rafter Bracket 
Soudal PVCu Gap Filler, White - 300ml 
ALM Code 5 Milled Lead - 1600mm x 3m 
Code 5 Cast Lead - 760mm x 3m 
ALM Code 7 Milled Lead - 510mm x 3m 
Soudal Acetoxy Stay Fresh Sanitary Silicone Sealant – Ice White 290ml (Box of 12) 
IKO Easymelt Bonding Bitumen Keg - 10kg 
Thompson's Emergency Roof Seal - Black 2.5L 
OX Pro Tuff Spirit Level - 600mm 
Soudal 30 Minute Bond D4 PU Wood Adhesive Liquid – 750g 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
Cromar Roof Felt Adhesive - Black 1 Litre 
Code 6 Cast Lead - 800mm x 6m 
Everbuild Lumberjack 5 Minute PU Wood Adhesive Gel – 310ml 
OX Pro Heavy Duty Aviation Snips Straight Cut (Yellow) 
Bostik Builder Tape, 50mm - 25m 
Klober Profile-Line Flat Tile Vent - Brown KG9856-3-0247 (Box of 10) 
Code 7 Cast Lead - 210mm x 3m 
Ronseal One Coat Stays White Radiator Paint - Gloss 750ml 
Thompson's One Coat Patio & Block Paving Seal - 5L Flashing Tape
Best Sellers
-
Ronseal Direct to Metal Paint – Matt 250ml
From: £11.99 Incl VAT £9.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Ronseal Diamond Hard Floor Wax – Natural Oak 2.5L
£49.99 Incl VAT £41.66 Excl VAT Add to basket -
Bond It Professional Foam Gun Applicator 1M
£16.99 Incl VAT £14.16 Excl VAT Add to basket -
Bond It Economy Sealant Gun – Blue 900ml
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Everbuild Industrial Superglue HV – Clear 20g
£4.99 Incl VAT £4.16 Excl VAT Read more -
OB41 Cut Tap Drill Fluid – 400ml
£11.99 Incl VAT £9.99 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
