Bond It Gripbond Pro Max Adhesive - White EU3

Uses

The Gripbond Pro Max Adhesive has outstanding properties, offering an initial grab of almost double the strength compared to most other adhesives. The typical bond strength of this product is 250Kg/m², suitable for interior and exterior application in any weather condition, this illustrates how advanced of a bond this is.

• Wood
• Metal
• Glass
• Stone
• Polystyrene
• Concrete
• Plasterboard
• Insulation board
• Ceramics
• Polyester

Preparation

Prepare the surfaces before application, and remove any contaminants that are present, this includes dust, oil and grease.

Application

1. Cut the top of the cartridge without damaging the screw thread
2. Screw the notched nozzle onto the top of the cartridge
3. Apply to a standard sealant
4. Apply directly to one of the two sides in one strip action or small beaded actions

Limitations

This product isn't recommended for application in areas immersed in water or surfaces that bleed oil or plasticiser. If the application is overhead or large mirrors, use mechanical fixing in conjunction to support it better.

Suppose the area of application is extremely large or heavy. In that case, it will need additional support to allow a complete cure to form fully. This product will not work well on polypropylene or Teflon. If you intend to paint on top of this product, test your paint on it first in an inconspicuous area with the product to see if it's compatible.