Ronseal Damp Seal Aerosol - White 400ml 
Everbuild Flue Jointing Compound - 1kg 
Everbuild 503 SBR Bond – 5 Litre 
Soudal Superglue Activator - 200ml (Box of 12) 
Gorilla Wood Glue - Brown 1L 
Code 6 Cast Lead - 180mm x 3m 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Brown (Box of 5) 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml 
Code 8 Cast Lead - 150mm x 3m 
FloPlast Half Round Internal Stop End, Black – 112mm 
Code 5 Cast Lead - 360mm x 3m 
Oxyturbo Turbo Set 90 Lead Welding & Lead Burning Kit 
Everflex Premium+ 450 Builders Silicone – Oak 300ml (Box of 25) 
Timco 30mm Cladding Pin - 250 Pieces 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Soudal Compact Foam Gun PU Foam 
Soudal Genius Gun Pipe & Plumbing Foam – 600ml 
Bond It Extruder for Foil Sausages - Silver 600ml 
Klober Uni Angle Ridge End Cap, Black 
Hambleside Danelaw TV15/7 Tile Vent - Black (Box of 5) 
Timco Mixed Cable Clips 
Everbuild General Purpose Silicone - Brown 290ml (Box of 12) 
Code 4 Cast Lead - 510mm x 3m 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Everbuild PVCu Solvent Cleaner – 1 Litre (Box of 12) 
Soudal Trade Roof & Insulation Expanding Foam Genius - 600ml (Box of 12) 
This Frame-Mate Door & Window Sealant from Bond It has excellent adhesion and filling qualities, ideal for joints with low movement. This product offers waterproof acrylic protection, perfect for your typical doors & window frames. It's suitable for concrete, wood, brick, natural stone, artificial stone and most other building materials.
However, on some surfaces, it may be appropriate to put a primer onto it first, this encourages the bonding process and secures the sealant.
Application
Prepare the area before application, including removing all dust and similar contaminants that can hinder the adhesion, ensuring it's clean and dry. If the application involves mechanical means, using a solvent like acetone to degrease and prepare the surface is recommended.
- Using a standard sealant gun, sealant onto the gun
- Cut the nozzle at an angle of 45°, with the size of the nozzle being slightly larger than the gap intending to fill
- Apply the sealant to the area
- Once applied, tool down using a sealant applicator tool wetted with soapy water (Can use a plastic spatula)
