Everbuild 402 Waterseal – 25 Litre 
Everbuild Multi-Stick Adhesive - White 350ml 
Samac Hall Hooks - (Bags of 10) 
Everbuild Forever Clear Silicone Sealant – 295ml 
Soudal Parquet & Timber Sealant - Dark Grey 290ml 
ALM Code 4 Milled Lead - 360mm x 3m 
Timco Lifting Sling 2000kg / 2 Tonnes 
Thompson's One Coat Concrete Seal - 5L 
Bond It Mirror Pro Adhesive - White EU3 
IKO 5U Eaves Protection Strips - 16m x 330mm 
Timloc Castellated Tile Vent Grey (Box of 8) 
Bond It Sealant Applicator Tool 
Ronseal Stays White Ultra Tough White Gloss Paint - 2.5L 
Ronseal Quick Drying Smooth Finish Filler - 600g 
Ronseal Stays White 2in1 Paint & Primer - Satin 2.5L 
Bond It Roof-Mate Roof & Gutter Sealant - Black EU3 
Everbuild PVCu Solvent Cleaner – 1 Litre (Box of 12) 
Cromar ProRidge Universal Ridge System 3m Kit 
FrogTape® Delicate Surface Masking Tape - Yellow 36mm x 41.1m 
Ronseal Super Flexible Smooth Finish Filler - 300ml 
Soudal Grip All Solvent-Based - 290ml 
Bond It Bitumen Paint - Black 5L 
Bond It FG8 Food Grade Silicone - White 310ml 
Freeflow 65mm Square Gutter Drain Pipe Shoe - Black 
Bond It Aluminium Foil Tape - 100mm x 45M (Box of 12) 
OX Pro Mini Square Mouth Shovel 
ALM Code 8 Milled Lead - 450mm x 6m 
Soudal Repair Express Cement – Grey 900ml 
Uses
Impact Adhesive by Evo-Stik offers outstanding adhesive properties, with its ability to instantly grab onto a surface, this product immediately binds surfaces and takes only 24 hours to reach its full strength. Despite the instant grab from the product, there is still an open time for movement between 20 - 60 minutes, depending on the temperature. Most glues cannot bind more challenging surfaces, such as non-porous and metal substrates, but this product can achieve full-strength adhesion. Some of the surfaces that this product is suitable for include;
- Wood
- MDF
- Laminate
- Metal
- PVC
- Cork
- Leather
- Rubber
- Glass
- Mirror
- Stone
- Ceramics
Preparation
Surfaces should be prepared before commencing the application to ensure optimal adhesion is achieved. This includes removing contaminants that can hinder the adhesion, such as dirt, dust, oil, grease and similar impurities.
Application
- Using a standard spreader, spatula or paintbrush
- Apply a thin coat of adhesive onto one of the surface
- Bring the surfaces together, holding them firmly together for a few minutes to allow the bond to form
- Leave the surfaces bonded together for a total of 24 hours to enable optimal adhesion to be achieved
Limitations
- This product is unsuitable for application on polystyrene, cellulose paint, vinyl, polythene, polypropylene and rayon fabrics. Always test in a small, inconspicuous area before completing the project if you need more clarification.
