FloPlast Square 112° Offset Downpipe - White 
FloPlast Half Round Downpipe Shoe, Brown – 68mm 
Soudal Soudaduct - Grey 300ml 
Code 5 Cast Lead - 390mm x 6m 
Ronseal One Coat Stays White Radiator Paint - Matt 250ml 
OX Tools 12 inch / 300mm Pro Stainless Steel Plasterers Mud Pan 
Ronseal One Coat All Surface Primer and Undercoat - White 250ml 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
FloPlast Universal Hopper, Black – 65-68mm 
Timco Lifting Sling 3000kg Limit - 2m x 90mm 
Code 4 Cast Lead - 360mm x 6m 
ALM Code 8 Milled Lead - 850mm x 6m 
Soudal Genius Gun Gap Filler Expanding Foam - 600ml 
Aluflow Downpipe Offset Bend - 112° (RAL Colours) 
ALM Code 7 Milled Lead - 914mm x 3m 
ALM Code 5 Milled Lead - 914mm x 6m 
Everbuild One Strike Filler - White 5L 
FloPlast Square Line Pipe Connector Black 
Ronseal Stays White Ultra Tough White Matt Paint - 2.5L 
Evercryl Emergency Roof Repair - Clear 310ml 
Klober Profile-Line Flat Tile Vent - Antique Red KG9856-3-0116 (Box of 10) 
Code 3 Cast Lead - 1600mm x 6m 
FloPlast Round Shoe - White 
Everbuild P18 Gas Leak Detector - 400ml (Box of 12) 
Uses
The Trade Polyurethane Mattcoat Varnish by Ronseal offers your interior wood the highest level of protection. With its trade tier quality, this product is only used by those seeking the best results. Perfect for all types of wood found in the interior. However, this product is unsuitable for application onto wooden floors.
Preparation
Sand the surface of the wood down using 120-grit paper. It's advised to wear a mask in this process to avoid inhaling dust particles. After you've sanded the surface, wipe it down with white spirit and let it dry.
Application
- Stir the tin thoroughly to mix the paint.
- Using a brush, apply a coat onto the wood following the direction of the grain.
- Leave 6 hours for the layer of paint to dry, then apply a second coat.
- Before applying the 3rd and final coat, you should slightly sand the surface down. It will optimise the last coat and presents the best quality finish.
Aftercare
Any leftover varnish on your brush can be washed off using white spirit. Don't let any of the leftover varnishes go down into the drain or watercourses.
