Code 5 Cast Lead - 390mm x 6m 
Code 6 Cast Lead - 390mm x 6m 
Code 3 Cast Lead - 210mm x 6m 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 125mm 
Oxyturbo Turbo Set 90 Lead Welding & Lead Burning Kit 
Code 4 Cast Lead - 360mm x 6m 
Code 8 Cast Lead - 1600mm x 3m 
ALM Code 4 Milled Lead - 390mm x 6m 
FloPlast Half Round Square Line Gutter Adaptor - Black 
Aluflow Downpipe Connector - (RAL Colours) 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 25M 
ALM Code 6 Milled Lead Flashing - 914mm x 6m 
Everbuild Stixall Extreme Power – Black 290ml 
Bond It Contractors Grade PVA White 500ml - Box of 20 
OX Tools Pro Sharpdraw Snap Off Pencil Replacement Blades - Set of 3 
Timloc Non-Profile Tile Vent Red (Box of 8) 
Uses
The Mitre Bonding Kit Superglue Adhesive & Activator by Soudal is an outstanding, high-strength, rapid-curing glue perfect for various horizontal and vertical surfaces. This is achieved through the two-component system, which includes a cyanoacrylate adhesive and an activator. When used in conjunction with one another, this product increases the adhesive's performance and reduces curing times significantly.
Preparation
This product only requires a little preparation, but it's essential to complete it to ensure optimal results are achieved. Ensure all surfaces to be bonded are free from dust and grease.
Application
- Spray one of the surfaces with the activator and apply the adhesive to the other.
- Bring both surfaces together and press for at least one minute to allow it to cure fully.
Limitations and Notes
- After using the products, clean the nozzle to ensure no glue cures inside, and you can re-use it.
- You may use the adhesive without the activator, but curing times will be significantly longer.
