Everbuild Instant Nails – White 290ml (Box of 12) 
Everbuild Multi-Purpose Wood Filler - 250ml Dark Oak 
Bond It Contractors Grade PVA White 500ml - Box of 20 
Cromar Vent 3 Light Breathable Membrane – 1.5m x 50m 
Corrapol-BT Eaves Filler 
ALM Code 3 Milled Lead - 1000mm x 3m 
Thompson's One Coat Waterseal - 5L 
Everbuild Triple Action Wood Treatment – 25 Litre 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
Bond It Heavy Duty Gun Foam Applicator 
OX Tools Plasterers Bucket, Blue – 25 Litre 
OX TOOLTREK Trade Wheeled Tool Storage System 3 Pieces 
Code 5 Cast Lead - 240mm x 3m 
Everbuild Evercryl One Coat Grey – 20kg 
ALM Code 8 Milled Lead - 510mm x 3m 
Ronseal Diamond Hard Doorstep Paint - Black Satin 250ml 
Soudal Degrip All Spray – 400ml 
Ronseal Precision Finish Brush - 2 Inch 
Siroflex Painters Caulk-It - 310ml 
Soudal Trade Sanitary Silicone - White 290ml (Box of 12) 
Everbuild 501 PVA – 500ml 
Uses
The Repair Express Cement by Soudal is perfect for repairing mineral surfaces that are suffering from cracks, holes and general small damage. This product is forged using a unique, granular structure which has fantastic adhesion to various surfaces, allowing it to fill and bridge gaps effortlessly. Compared to other conventional cement repair products, this one stands out with its ability to be painted, blending it seamlessly into the structure.
Preparation
Before commencing the application, ensure that the surface and gap to be filled are entirely free from contaminants that can hinder the adhesion, such as dirt, dust, grease, oil, organic growth, etc. Highly porous surfaces should be primed to enhance the glue, ensuring an effective and optimal result.
Application
- Apply to the gap using a putty knife.
- If the gap is larger than 5cm, allow the first load to cure and apply a second over. Each layer will take about 30 minutes to cure.
- After finishing the application, smooth it down to a flush finish before it's cured.
Limitations and Notes
- Do not apply this product to areas that are subject to constant water immersion
- This product is not suitable for expansion and dilatation joints
