Everbuild 209 Liquid Mortar Tone - Black 5 Litre 
Hedgehog Gutter Brush Leaf Guard White – 4m x 100mm 
Timloc Underlay Felt Lap Vent (Box of 50) 
Code 6 Cast Lead - 150mm x 6m 
Everbuild General Purpose Silicone - Black 290ml (Box of 12) 
Ronseal Knot Block Primer & Undercoat - White 250ml 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Ronseal Stays White 2in1 Paint & Primer - Matt 2.5L 
Bond It Silicone Release Spray - 500ml Clear (Mould Releasing Lubricant) 
OX Pro Grout Remover Replacement Blades 50mm - Pack 2 
Timloc Plain Tile Vent Red (Box of 14) 
ALM Code 8 Milled Lead - 600mm x 6m 
Permavent Easy Slate 600 - Pack of 20 
Everbuild Stixall Extreme Power - Clear 290ml (Box of 12) 
Timco Polypropylene Rope - Blue 30m 
Klober 20K Slate Vent KG9795-0429 Slate Grey 
Easy-Trim Over Fascia Vent - 25mm x 500mm (Box of 50) 
Bond It SBR Admixture - White 2.5L 
Code 8 Cast Lead - 800mm x 3m 
Everbuild Plumbers Gold Sealant – Clear 290ml (Box of 12) 
OX Pro Moulding Bar - 10" / 250mm 
Samac Hall Hooks - (Bags of 10) 
ALM Code 6 Milled Lead Flashing - 210mm x 6m 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 400) 
OX Pro Tough Bucket, Blue - 15 Litre 
Soudal Repair Express Plaster - White 250ml 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
OX Tools OXIT Sealant & Adhesive - Clear 290ml (Box of 12) 
Siroflex SX Contractors LMN Silicone OAK 300ml 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Everbuild 206 Strike Release Oil – 5 Litre 
Premium Flashpoint Lead Sealant - Grey Roof Felt Adhesives
Best Sellers
-
Everbuild Triple Action Wood Treatment – 2.5 Litre
£18.99 Incl VAT £15.83 Excl VAT Add to basket -
Code 7 Cast Lead – 914mm x 3m
£279.89 Incl VAT £233.24 Excl VAT Add to basket -
Code 4 Cast Lead – 800mm x 6m
£279.89 Incl VAT £233.24 Excl VAT Add to basket -
Ronseal Interior Wax – 750ml
From: £18.99 Incl VAT £15.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild Stick2 Superglue De-Bonder – 20ml
£4.98 Incl VAT £4.15 Excl VAT Add to basket -
Code 4 Cast Lead – 1200mm x 3m
£208.49 Incl VAT £173.74 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
