Code 5 Cast Lead - 1200mm x 6m 
Freeflow 65mm Square Down Pipe Connector - Black 
ALM Code 4 Milled Lead - 914mm x 3m 
FloPlast Square Line Shoe White – 65mm 
Soudal Construction Silicone, Clear - 290ml (Box of 12) 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml (Box of 12) 
ALM Code 5 Milled Lead - 1600mm x 3m 
FloPlast Half Round Internal Stop End, White – 112mm 
Soudal PVCu Cream Cleaner - 1L 
ALM Code 6 Milled Lead Flashing - 390mm x 3m 
FloPlast Square Line Pipe Branch White – 65mm 
Everbuild Salt-Away Salt Remover – 5 Litre 
Thompson's Emergency Roof Seal - Black 2.5L 
Everbuild PVCu Acti-Spray – Clear 200ml 
Ronseal Stays White Ultra Tough White Gloss Paint - 750ML 
Ronseal Exterior Yacht Varnish - Satin 500ml 
Soudal Construction Silicone, Grey - 290ml 
ALM Code 8 Milled Lead - 510mm x 3m 
Everbuild Stainblock - White 400ml 
Everbuild Glass Protector - Red (600mm x 25m) 
Ronseal One Coat Damp Seal - White 250ml 
Klober Flexipipe 75/100mm - (KG972400) 
Bond It Gripbond Pro Max Adhesive - White EU3 
Timloc Castellated Tile Vent Terracotta (Box of 8) 
Everbuild Everflex 225 Industrial & Glazing Silicone - White 295ml (Box of 25) 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml 
Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
Everbuild 204 Evermix 3 in 1 - 5 Litre 
OX Tools Pro Self Levelling Laser Level - 60m 
ALM Code 3 Milled Lead - 150mm x 6m 
Bond It Economy Sealant Gun - Blue 300ml 
Spax Pozi Pz3 Drill Bits - 25mm (Pack of 5) 
Ronseal One Coat Water-Based Tile Paint - Black Satin 750ml 
Soudal Repair Express Plaster - White 900ml 
Bond It Barrier Tape Yellow and Black - 70mm x 500M 
Code 4 Cast Lead - 914mm x 3m 
Sikabond PVA - White 5 Litre 
Timloc Thin Leading Edge Tile Vent Black 
Everbuild 701 Non-Slip Tile Adhesive – White 3.75kg 
Samac Snowguard - 225mm x 2m 
FloPlast Half Round Union Unit - Black 
Everbuild Lumberjack 550 Floor Adhesive – 600ml (Box of 12) 
Ronseal Interior Varnish - Clear Matt 2.5L 
Cromar Vent 3 Light Breathable Membrane - 1m x 25m 
Ronseal Ultimate Finish Decking Applicator Refill Pads 
Bond It Caulk-Mate One Hour Decorators Caulk - White EU3 
Cromar Bitumen Trowel Mastic - Black 5L 
Everbuild Everflex Fire Mate Intumescent Sealant – 295ml Roof Felt Adhesives
Best Sellers
-
Ronseal One Coat Blackboard Paint – Black 250ml
£11.99 Incl VAT £9.99 Excl VAT Add to basket -
Soudal Soudafoam Hand Held One Shot – 150ml (Box of 12)
£44.28 Incl VAT £36.90 Excl VAT Read more -
Spax Pozi Flat Countersunk Wirox Screws – 4.0mm Diameter (Box of 200)
From: £7.49 Incl VAT £6.24 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Soudal Window & Door Expanding Foam – Genius Gun Max 600ml Champagne
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Spax T-Star Plus Washer-Head Wirox Coated Screws – 6.0 x 100mm
From: £6.99 Incl VAT £5.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Soudal Trade Roof & Insulation Expanding Foam Genius – 600ml (Box of 12)
£51.00 Incl VAT £42.50 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
