Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Soudal Genius Gun Gap Filling and Expanding Foam - 500ml 
Code 5 Cast Lead - 240mm x 6m 
Timco Driver and Ground Jobber Bit Set 
Ronseal Stays White One Coat Non-Drip Paint - Gloss 2.5L 
Soudal Genius Gun Gap Filling Foam - 750ml 
Bond It High Gloss Block Sealer - Clear 5L 
FloPlast Half Round Downpipe Branch 67.5°, White 
Bond It Pro-Mate LMA Silicone - Translucent EU3 
Bond It Mould Stop - Clear 1L 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Antique Red (Box of 5) 
Cromar All Weather Roof Coat – Black 2.5 Litre 
Ronseal Exterior Yacht Varnish - Satin 1L 
Freeflow 112mm Gutter Internal Stop End - Black 
Samac Aluminium Clout - 1kg (40mm x 2.65mm) 
Ox Tools OX Pro Aviation Snips With Holster - Left Cut (Red) 
Timloc Mini Castellated Tile Vent Brown (Box of 14) 
Easy-Trim Hall Clips, Bag of 50 
Code 6 Cast Lead - 600mm x 3m 
Bond It Bitumen Paint - Black 25L 
OX Pro Tuff Rule - Cyan 
OX Tools Drywall Rasp 250mm 
Soudal Soudalead PB Lead Sealant - Grey 300ml (Box of 12) 
OX Trade Hard Green Carpenters Pencils – Pack of 10 
Everbuild PVCu Solvent Cleaner – 1 Litre 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Slate Grey (Box of 5) 
Bond It Cyanoacrylate Superglue Medium Viscosity, Clear - 50g 
FloPlast Half Round Running Outlet, Black Roof Felt Adhesives
Best Sellers
-
Timco Straight Tower Bolt Black 6″ Gate Bolt
£2.79 Incl VAT £2.33 Excl VAT Add to basket -
Everbuild Professional Sealant Gun – C3 (280ml – 310ml)
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Sika Sanisil Sanitary Silicone – 300ml
£8.99 Incl VAT £7.49 Excl VAT Read more -
Evo-Stik Glazing Silicone Sealant – Clear 280ml
£7.49 Incl VAT £6.24 Excl VAT Read more -
Freeflow Round 112mm Gutter System 135° – White
£3.99 Incl VAT £3.33 Excl VAT Add to basket -
ALM Code 5 Milled Lead – 180mm x 6m
£76.46 Incl VAT £63.72 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
