Everbuild Professional Sealant Gun - C3 (280ml - 310ml) 
Ronseal Precision Finish Brush - 3 Pack 
Easy-Trim Over Fascia Vent - 25mm x 1m 
Code 5 Cast Lead - 210mm x 3m 
Klober Universal Tile Vent Terracotta KG9854 (Box of 10) 
Thompson's One Coat Waterseal - 1L 
Everbuild Forever White Silicone Sealant – 295ml (Box of 12) 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml (Box of 12) 
Bond It Expanding Foam Cleaning Fluid - Clear 500ml 
Timco Twin-Threaded Woodscrew Mixed Tray 
ALM Code 3 Milled Lead - 1200mm x 3m 
Everbuild Exact Gap Foam - 750ml 
ALM Code 4 Milled Lead - 600mm x 3m 
SOUDAL Fix ALL X-treme Power & Tack Sealant Adhesive Express WHITE - 280ml 
Everbuild Black Jack 902 Bitumen & Flashing Primer – 5 Litre 
Timco Mixed Plasterboard Fixings 
ALM Code 5 Milled Lead - 760mm x 6m 
Hambleside Danelaw (HD DPCA) Tile Vent Adaptor for TV10 Range 
Permavent Permatac Butyl Tape 19m X 50mm 
Everbuild Stick2 Rapid Epoxy Tube (2 x 12ml) 
Bond It Silicone Ultra Waterseal - Clear 5L 
Timco Mixed Cable Clips 
Bond It Professional Foam Gun Applicator 1M 
OB41 White Grease Spray - 400ml 
Ronseal Ultra Tough Mattcoat Clear Varnish - 750ml 
OB41 Multi-Use Brake Cleaner - 400ml 
Everbuild Salt-Away Salt Remover – 5 Litre Roof Felt Adhesives
Best Sellers
-
Ronseal Trade 10 Year Woodstain – Dark Oak 2.5L
£39.98 Incl VAT £33.32 Excl VAT Add to basket -
Thompson’s uPVC Restorer – 480ml
£11.99 Incl VAT £9.99 Excl VAT Add to basket -
Samac Copper Clout Nails – 38mm x 3.35mm
From: £24.00 Incl VAT £20.00 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Code 7 Cast Lead – 300mm x 3m
£91.39 Incl VAT £76.16 Excl VAT Add to basket -
Timco Screwdriver 6-Tool Set
£14.99 Incl VAT £12.49 Excl VAT Add to basket -
Timloc Ambi-Verge Universal Dry Fix Verge
From: £4.99 Incl VAT £4.16 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
