Code 4 Cast Lead - 800mm x 6m 
Ronseal Stays White Ultra Tough White Matt Paint - 2.5L 
Everbuild EuroScrim Plasterboard Tape – 48mm x 90m 
Timco 30mm Cladding Pin - 250 Pieces 
Timco Twin-Threaded Woodscrew Mixed Tray 
Everbuild Lumberjack Wood Preserver – Clear 1 Litre 
FloPlast Square Line Pipe Connector White 
Isoflex Clean Up Fluid - 500ml 
Evo-Stik Tile & Grout Adhesives - White 3kg 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Terracotta (Box of 5) 
Hambleside Danelaw (HD PCA) Tile Vent Adaptor for TV10 range 
Code 7 Cast Lead - 210mm x 3m 
Code 6 Cast Lead - 240mm x 3m 
Ronseal Exterior Yacht Varnish - Satin 250ml 
SEAL PRO, Low Modulus Hybrid Universal Sanitary Sealant & Adhesive Bond, White - EU3 
Timloc Plastic Insulation Retaining Discs - 80mm Red 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
ALM Code 8 Milled Lead - 180mm x 3m 
OX Pro Small Trowel - 200 x 75mm 
OX Tools 600/1200/1800mm Pro Spirit Level Set with Bag 
Bond It Aluminium Foil Tape - 75mm x 45M (Box of 16) 
Everbuild Everflex 200 Contractors LMA Silicone - Brown 295ml 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
Chesterfelt Polyester Reinforced Shed Roofing Felt - Green 10m x 1m 
Lead Flexi Slate Pipe Flashing - Flat 
Ulti-Mate Stonewold MkII Roof Tile Vent - Brown 
OX Tools Pro Torpedo Level, 9" / 230mm 
Hambleside Danelaw Double Pantile Vent TV15/2 - Antique Red (Box of 5) 
Ulti-Mate Plain Tile Vent Adaptor 
Oxyturbo Turbo Set 90 Lead Welding & Lead Burning Kit Roof Felt Adhesives
Best Sellers
-
ALM Code 7 Milled Lead – 240mm x 6m
£144.43 Incl VAT £120.36 Excl VAT Add to basket -
FloPlast Square Line Offset Bend 112.5° Black – 65mm
£4.49 Incl VAT £3.74 Excl VAT Add to basket -
Roughneck® Square Micro Shovel
£19.49 Incl VAT £16.24 Excl VAT Read more -
Buckbootz BLITZ Lightweight Waterproof Honey Safety Lace Boot
From: £64.99 Incl VAT £64.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Soudal B1 Fire & Acoustic Expanding Foam Genius – 600ml
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
OX Trade 4 Piece Spirit Level Set – 230, 600, 1200 & 1800mm
£57.49 Incl VAT £47.91 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
