Soudal Compact Foam Gun PU Foam 
Code 7 Cast Lead - 850mm x 6m 
Everbuild Clear Fix – 290ml (Box of 12) 
Hambleside Danelaw Double Pantile Vent TV15/2 - Black (Box of 5) 
FloPlast Square Line Pipe Branch White – 65mm 
Ronseal One Coat Wood Primer & Undercoat - White 750ml 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 400ml 
Bond It The Beast PU Adhesive - Brown 250ml 
FloPlast Half Round Gutter 135° - Black 
ALM Code 4 Milled Lead - 914mm x 3m 
Everbuild Tecnic Foil Pack Gun 
Thompson's Water Seal - 2.5L 
Cromar Black Bitumen Paint – 2.5 Litre 
Lead Flexi Slate Pipe Flashing - Pitched 
Ronseal Diamond Hard Floor Wax - Natural 2.5L 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - White 
Sika MaxMix Waterproofer - 1 Litre 
Bond It Flash-Mate Lead Sealant - Grey EU3 
Bond It Frame-Mate Door & Window Sealant - White EU3 
FloPlast Half Round External Stop End, Brown – 112mm 
Everbuild Everflex Fire Mate Intumescent Sealant – 295ml 
Timloc Underlay Felt Lap Vent 
Samac Aluminium Clout - 1kg (40mm x 2.65mm) 
Ronseal Expanding Foam Filler - 500ml 
OX Pro Nylon High Vis Builders Line 105m / 350ft - Cyan 
Ulti-Mate Ulti-Match Plain Tile Vent 
Timco Hazard Tape 
Cromar Bitumen Primer – Black 1 Litre 
ALM Code 8 Milled Lead - 450mm x 6m 
Thompson's Patio & Block Paving Anti-Slip Additive - 200g 
Everbuild EuroScrim Plasterboard Tape – 48mm x 90m 
Ronseal Multi Purpose Smooth Finish Filler - 1.2kg + 50% Free 
Timco Air Wedge 
Stanley Heavy-Duty Scraper - 75mm 
Everbuild Clear Fix – 290ml 
Soudal Pro 30D Waterproof Wood Adhesive - 750g 
Bond It Anchor Bond Applicator - Blue 400ml 
Soudal B1 Fire & Acoustic Expanding Foam Genius - 600ml Roof Felt Adhesives
Best Sellers
-
JCB Black Trade T-Shirt
From: £11.30 Incl VAT £9.42 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Code 6 Cast Lead – 210mm x 3m
£54.26 Incl VAT £45.22 Excl VAT Add to basket -
FloPlast Round Line Downpipe Clip, Black
£1.99 Incl VAT £1.66 Excl VAT Add to basket -
Felt Support Tray – 1.5m
£1.99 Incl VAT £1.66 Excl VAT Add to basket -
Soudal Grip ALL Solvent-Free – White 290ml
£5.99 Incl VAT £4.99 Excl VAT Add to basket -
Bond It WP70 Neutral Cure Oxime Silicone – EU3
From: £5.80 Incl VAT £4.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
