ALM Code 3 Milled Lead - 850mm x 6m 
Bond It Bitumen Paint - Black 1L 
Everflex Contract 125 One Hour Caulk, White - 300ml (Box of 25) 
Timco M6 Zip-Fix Cavity Wall Fixings - 10 Pieces 
Bond It Bitumen Primer - Black 1L 
Timco Mixed Cable Clips 
Timloc Plain Tile Vent Terracotta (Box of 14) 
Ronseal Exterior Yacht Varnish - Satin 500ml 
Everbuild Forever White Powder Wall Tile Grout – 1.2kg 
Timco Round Wire Nails, Pack of 40 
Code 7 Cast Lead - 1600mm x 3m 
Cromar Vent 3 Classic Breathable Membrane - 1m x 50m 
Hambleside Danelaw TV15/4 Tile Vent - Terracotta (Box of 5) 
Klober Thin Line Vent - Black KG9855-3-0450 (Box of 10) 
Hambleside Danelaw (HD DPCSPA) Tile Vent Adaptor and Flexi for TV10 Range 
Soudal Trade All Weather Sealant - Clear 290ml (Box of 12) 
Ulti-Mate Bold Roll Brown Tile Vent 
Code 5 Cast Lead - 760mm x 3m 
IKO Shed Felt - Black 8m Roll 
Ronseal Stays White Ultra Tough White Satin Paint - 2.5L 
Everbuild Anchorset Green 300 - Grey 300ml 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 400ml 
Bond It Frame-Mate Door & Window Sealant - Brown EU3 
Bond It Bitumen Paint - Black 25L 
ALM Code 8 Milled Lead - 1600mm x 6m 
Ronseal Super Flexible Smooth Finish Filler - 300ml 
ALM Code 5 Milled Lead - 1200mm x 6m 
Ronseal Trade 10Yr Woodstain Satin Walnut 2.5ltr Brown 
Thompson's One Coat Waterseal - 1L 
ALM Code 4 Milled Lead - 240mm x 3m 
Soudal Trade All Weather Sealant - Clear 290ml 
Thompson's One Coat Waterseal - 5L 
Evo-Stik Impact Adhesive - 500ml 
Everbuild General Purpose Silicone - Clear 280ml (Box of 12) 
FloPlast Half Round Gutter 90° Bend, Brown – 112mm Flashing Tape
Best Sellers
-
Samac Aluminium Clout – 1kg (40mm x 2.65mm)
£15.70 Incl VAT £13.08 Excl VAT Add to basket -
OX Pro Tuff Rule – Cyan
£14.49 Incl VAT £12.08 Excl VAT Add to basket -
Everbuild 404 Fungicidal Wash – 1 Litre
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Thompson’s One Coat Patio & Block Paving Seal – 5L
£40.30 Incl VAT £33.58 Excl VAT Add to basket -
Cromar Vent 3 Light Breathable Membrane – 1.5m x 50m
£48.99 Incl VAT £40.83 Excl VAT Add to basket -
Timco Self-Drilling Wing-Tip Metal Construction Screw
£24.99 Incl VAT £20.83 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
