ALM Code 3 Milled Lead - 180mm x 6m 
Cromar Bitumen Primer – Black 1 Litre 
ALM Code 8 Milled Lead - 850mm x 3m 
Thompson's uPVC Restorer - 480ml 
Code 6 Cast Lead - 850mm x 6m 
ALM Code 4 Milled Lead - 180mm x 3m 
Soudal Fix ALL Flexi – Black 290ml (Box of 12) 
Bond It FG8 Food Grade Silicone - White 310ml 
Soudal Trade PU Construction Adhesive - Beige 290ml 
Soudal Fix ALL Turbo - Black 290ml 
Hambleside Danelaw TV15/7 Tile Vent - Brown (Box of 5) 
Easy-Trim Universal Dry Verge System - Grey (Box of 50) 
Ulti-Mate Bold Roll Brown Tile Vent 
Bond It Mirror Pro Adhesive - White EU3 
Everbuild Febond PVA - 1L 
Leadax Lead Free Flashing Alternative 150mm (6m rolls) 
Everbuild Pinkgrip SF But It’s White – 380ml 
Easy-Trim Lead R Flashing Textured – 150mm x 5m 
Soudal Genius Gun Plasterboard Adhesive - 750ml 
ALM Code 7 Milled Lead - 180mm x 3m 
Code 5 Cast Lead - 850mm x 3m 
Everbuild 406 Stabilising Solution - 5 Litre 
Thompson's Stain Block Damp Seal - White 250ml 
Code 4 Cast Lead - 390mm x 3m 
OX Tools OXIT Sealant & Adhesive - Anthracite 290ml (Box of 12) 
SikaBond Waterproof PVA – 5 Litre Flashing Tape
Best Sellers
-
OX Pro Club Hammer
From: £29.99 Incl VAT £24.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Permavent Black Breather Membrane – 1m x 20m
£32.49 Incl VAT £27.08 Excl VAT Add to basket -
Everflex Premium+ 450 Builders Silicone – White 300ml (Box of 25)
£120.75 Incl VAT £100.63 Excl VAT Add to basket -
Aluflow Downpipe Offset Bend – 112° (RAL Colours)
£30.40 Incl VAT £25.33 Excl VAT Read more -
Bond It Flashing Tape – Grey
From: £6.99 Incl VAT £5.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Soudal Trade Sanitary Silicone – White 290ml
£7.99 Incl VAT £6.66 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
