Bond It Felt Adhesive - Black 5L 
ALM Code 6 Milled Lead Flashing - 850mm x 6m 
ALM Code 4 Milled Lead - 240mm x 3m 
Everbuild 405 Path & Patio Seal – 25 Litre 
Sika Multi-Use Biodegradable Wonder Wipes (60 Wipes) 
Code 5 Cast Lead – 650mm x 6m 
Bond It Dec-Mate Flexible Filler - White EU3 
Soudal Construction Silicone, Grey - 290ml 
ALM Code 8 Milled Lead - 300mm x 3m 
OX Trade Stubby Level - 100mm 
OX Pro Dry Wall External Corner Trowel - 100mm x 125mm 
Copper Coil 20m x 50mm 
FloPlast Half Round Internal Stop End, Black – 112mm 
Roughneck® Gorilla Bar Twin Pack - 35cm & 55cm (14in & 22in) 
Everbuild Jetcem Deep Rapid Repair Sand & Cement – 2kg 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml 
Bond It Mega Foam Gun/Aerosol PU Expanding Foam - Beige 750ml 
Everbuild Plumbers PVC Pipe Cement - Clear 250ml (Box of 12) 
Bond It Stain Block - 400ml Off White 
Freeflow Round 112mm Gutter System 135° - White 
Soudal Decorators Caulk – White 290ml (Box of 24) 
Sika Damp-Proof Slurry Grey - 25kg 
Timco Mixed Carriage Bolts, Nuts and Washers Grab Pack 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) 
Everbuild 408 Super Seal - 5 Litre Flashing Tape
Best Sellers
-
Code 3 Cast Lead – 914mm x 3m
£117.10 Incl VAT £97.58 Excl VAT Add to basket -
Timco FirmaHold AG Collated Brad Nails – 16g x 38 GALV 2000pcs
From: £7.49 Incl VAT £6.24 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild Everflex 200 Contractors LMA Silicone – Brown 295ml (Box of 25)
£76.00 Incl VAT £63.33 Excl VAT Read more -
Soudal B1 Fire Class Expanding Foam Handheld – 750ml
£9.99 Incl VAT £8.33 Excl VAT Add to basket -
56 x Cromar Protect 1F Non-Breathable Roofing Felt – 1m x 45m
£1,680.00 Incl VAT £1,400.00 Excl VAT Read more -
Everbuild 409 Block Paving Sealer – 5 Litre
£32.99 Incl VAT £27.49 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
